2905744
CBM E8 24DC/0.5-10A NO-R
Height: | 130 mm |
Width: | 41 mm |
Depth: | 121 mm (incl. DIN rail 7.5 mm) |
Ambient temperature (operation): | -25 °C ... 70 °C (Startup at -40 C type-tested) |
Ambient temperature (storage/transport): | -40 °C ... 80 °C |
Humidity test: | 240 h, 95 % RH, 40 °C |
Altitude: | ≤ 6000 m (amsl (above mean sea level)) |
Shock (operation): | 30g (IEC 60068-2-27, Test Ea) |
Vibration (operation): | 5 Hz ... 24.9 Hz (Amplitude ±1.6 mm; in accordance with IEC 60068-2-6, Test Fc) |
Degree of protection: | IP20 |
Flammability rating according to UL 94: | V-0 |
Mounting type: | DIN rail: 35 mm |
Color: | light grey RAL 7035 |
Number of positions: | 1 |
Protection class: | III |
Degree of pollution: | 2 |
Type: | DIN rail module, one-piece |
Fuse type: | electronic |
Rated surge voltage: | 0.5 kV |
Operating voltage: | 18 V DC ... 30 V DC |
Rated voltage: | 24 V DC |
Rated current IN: | max. 80 A DC (for double supply IN+ with at least 2 x 6 mm²) |
Measuring tolerance I: | typ. 40 % (0.5 A ... 1 A) |
Feedback resistance: | max. 35 V DC |
Fail-safe element: | 15 A DC (per output channel) |
Active current limitation: | typ. 2.0 x IN (0.5 - 1 A) |
Efficiency: | > 99 % |
Closed circuit current I0: | typ. 50 mA |
Power dissipation: | 1.2 W (No-load operation) |
Module initialization time: | 3.3 s |
Waiting time after switch off of a channel: | 10 s (at overload / short circuit) |
Temperature derating: | 40 A DC (at 70°C (65°C for UL 2367)) |
Tripping method: | E (electronic) |
Required backup fuse: | Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. |
Short-circuit switching capacity: | 300 A |
Dielectric strength: | max. 30 V DC (Load circuit) |
MTBF (IEC 61709, SN 29500): | 1304293 h (at 25 °C) |
Shutdown time load circuit: | 0.02 s (> 1.3 x IN) |
Undervoltage switch-off load circuit: | ≤ 17.8 V DC (active) |
Overvoltage switch-off shutdown load circuit: | ≥ 30.5 V DC (active) |
Max. capacitive load load circuit: | 75000 µF |
Output voltage status output: | 24 V DC |
Output current status output: | max. 20 mA (when I > 80% at at least one channel) |
Input voltage reset input: | 7 V DC ... 30 V DC (Reset with falling edge) |
Current consumption reset input: | typ. 0.4 mA (at 24 V DC) |
Pulse length reset input: | ≥ 50 ms (High signal) |
Voltage reset input: | < 5 V DC (Low signal) |
Connection name: | Remote indication circuit |
Switching function: | N/O contact |
Stripping length: | 10 mm |
Conductor cross section solid: | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG: | 24 ... 12 |
Conductor cross section, flexible, with ferrule, with plastic sleeve: | 1.5 mm² ... 0.25 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve: | 0.25 mm² ... 2.5 mm² |
DC operating voltage: | 0 V DC ... 30 V DC |
DC operating current: | 1 mA DC ... 100 mA DC |
Channel LED off: | off (Channel switched off) |
Channel LED green: | lit (Channel switched on) |
Channel LED yellow: | lit (Channel switched on, channel load > 80% ) |
Channel LED yellow-green: | flashing (Channel switched on, nominal current assistant active) |
Channel LED red: | lit (Channel switched off, over- or undervoltage active) |
Channel LED red-yellow: | flashing (Channel switched on, overload mode, capacity approximately 110 ... 130% , shutdown after 30 s) |
Channel LED red-green: | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
DC OK LED off: | off (No supply voltage) |
DC OK LED green: | lit (Operating voltage in nominal range 18 ... 30 V) |
DC OK LED yellow: | lit (Undervoltage active, voltage ≤ 17.8 V, active channels switched off and channel LEDs are lit red) |
DC OK LED red: | lit (Overvoltage switch-off active, voltage ≥ 30.5 V, channels switched off and channel LEDs are lit red) |
Connection name: | Main circuit IN+ |
Connection method: | Push-in connection |
Stripping length: | 18 mm |
Conductor cross section solid: | 0.75 mm² ... 16 mm² |
Conductor cross section AWG: | 20 ... 4 |
Conductor cross section, flexible, with ferrule, with plastic sleeve: | 0.75 mm² ... 10 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve: | 0.75 mm² ... 16 mm² |
Connection name: | Main circuit IN- |
Connection method: | Push-in connection |
Stripping length: | 10 mm |
Conductor cross section solid: | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG: | 24 ... 12 |
Conductor cross section, flexible, with ferrule, with plastic sleeve: | 0.25 mm² ... 1.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve: | 0.25 mm² ... 2.5 mm² |
Connection name: | Main circuit OUT |
Connection method: | Push-in connection |
Stripping length: | 10 mm |
Conductor cross section solid: | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG: | 24 ... 12 |
Conductor cross section, flexible, with ferrule, with plastic sleeve: | 0.25 mm² ... 1.5 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve: | 0.25 mm² ... 2.5 mm² |
Standards/specifications: | EN 61000-6-2 EMC – Immunity for industrial areas |
Designation: | UL approval |
Identification: | UL/C-UL Listed UL 508 |
Designation: | Shipbuilding approval |
Identification: | DNV GL |
Temperature: | D |
Humidity: | B |
Vibration: | B |
EMC: | A |
Enclosure: | Required protection according to the Rules shall be provided upon installation on board |
REACh SVHC: | Lead 7439-92-1 |
China RoHS: | Environmentally friendly use period: unlimited = EFUP-e |
eCl@ss 10.0.1: | 27140401 |
eCl@ss 4.0: | 27141100 |
eCl@ss 4.1: | 27141100 |
eCl@ss 5.0: | 27141100 |
eCl@ss 5.1: | 27141100 |
eCl@ss 6.0: | 27141100 |
eCl@ss 7.0: | 27141116 |
eCl@ss 8.0: | 27141116 |
eCl@ss 9.0: | 27141116 |
ETIM 5.0: | EC000899 |
ETIM 6.0: | EC000899 |
ETIM 7.0: | EC000899 |
UNSPSC 13.2: | 39121410 |
UNSPSC 18.0: | 39121410 |
UNSPSC 19.0: | 39121410 |
UNSPSC 20.0: | 39121410 |
UNSPSC 21.0: | 39121410 |
ECCN: | |
País de origen: | DE |
EAN: | |
Peso: | 0,305 kg |
Longitud: | 0,00 m |
Anchura: | 0,00 m |
Altura: | 0,00 m |