View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Seleccione el idioma
Solicitud con 1 clic
Producto
Pepperl+Fuchs
245611
VBA-2E-G10-ZAL-1M-2V31-G
Solicitar una oferta
Pepperl+Fuchs 245611
VBA-2E-G10-ZAL-1M-2V31-G
AS-Interface sensor/actuator module
Bajo pedido. Envíenos un correo electrónico para consultar el precio y la disponibilidad.
"ucnguBrctvdgcxgt0eqo"
Descripción
G10 ultra compact module. 2 inputsfa
Parámetros técnicos
| Slave type: | A/B slave |
| AS-Interface specification: | V3.0 |
| Required master specification: | ≥ V2.1 |
| UL File Number: | E223772 "For use in NFPA 79 Applications only" |
| LED FAULT: | Fault indication; red LED Red: Communication fault or address is 0 Flashing red: Sensor supply overload or no external auxiliary power UAUX |
| LED AS-i: | AS-Interface voltage; LED green |
| LED IN: | switching state (input); 2 LED yellow |
| Auxiliary voltage: | 20 ... 30 V DC PELV |
| Rated operating voltage: | 18.5 ... 31.6 V from AS-Interface |
| Rated operating current: | ≤ 40 mA / max. 60 mA |
| Protection class: | III |
| Surge protection: | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
| Number/Type: | 2 inputs for 2- or 3-wire sensors (PNP), DC |
| Supply: | from external auxiliary voltage UAUX |
| Voltage: | 20 ... 30 V |
| Current loading capacity: | ≤ 1000 mA overload and short-circuit resistant |
| Input current: | ≤ 9 mA (limited internally) |
| Switching point: | according to DIN EN 61131-2 (Type 2) |
| : 0 (unattenuated): | ≤ 3 mA |
| : 1 (attenuated): | ≥ 5 mA |
| Signal delay: | < 1 ms (input/AS-Interface) |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 62026-2:2013 |
| Degree of protection: | EN 60529:2000 |
| Fieldbus standard: | EN 62026-2:2013 |
| Input: | EN 61131-2:2007 |
| Emitted interference: | EN 61000-6-4:2007 |
| AS-Interface: | EN 62026-2:2013 |
| Noise immunity: | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Profile: | S-0.A.E |
| IO code: | 0 |
| ID code: | A |
| ID1 code: | 7 |
| ID2 code: | E |
| Data bits (function via AS-Interface): | input output |
| Electromagnetic compatibility: D0: | IN1 - |
| Electromagnetic compatibility: D1: | IN2 - |
| Electromagnetic compatibility: D2: | - - |
| Electromagnetic compatibility: D3: | - - |
| Parameter bits (programmable via AS-i): | function |
| Electromagnetic compatibility: P0: | not used |
| Electromagnetic compatibility: P1: | Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings) |
| Electromagnetic compatibility: P2: | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
| Electromagnetic compatibility: P3: | not used |
| UL approval: | cULus Listed, Type 1 enclosure |
| Electromagnetic compatibility: Maximum permissible ambient temperature: | max. 65 °C (max. 149 °F) |
| Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Shock and impact resistance: | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Vibration resistance: | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
| Degree of protection: | IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
| Connection: | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF003-SS1-A (3-pin, bushing contacts, snap lock, A-coded) Matching connector: NM003-Sx1-A or similar |
| Material: Contacts: | CuSn / Au |
| Material: Housing: | PBT PC |
| Material: Body: | black PUR |
| Material: Cable: | PUR |
| Material: Mounting screw: | Stainless steel 1.4305 / AISI 303 |
| Cable: Sheath diameter: | ∅4,3 mm |
| Cable: Color: | black |
| Cable: Cores: | 3 x 0.34 mm2 |
| Cable: Length: | 1 m |
| Mass: | 100 g |
| Tightening torque, fastening screws: | 1.65 Nm |
| Tightening torque, cable gland: | 0.4 Nm |
Parámetros logísticos
| ECCN: | |
| País de origen: | ID |
| EAN: | |
| Peso: | 0,00 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |