Pepperl+Fuchs
236170
HICTB08-YC3-RRB-KS-CC-AM08
Pepperl+Fuchs 236170
HICTB08-YC3-RRB-KS-CC-AM08
Termination Board
Descripción
La función de la placa terminal así como la asignación de los pines del conector es compatible con los requisitos de los sistemas Yokogawa. System board for Yokogawa CENTUM VP, For 8-channel AI card AAI135, For 8-channel AI/AO card AAI835, For 8 modules, Recommended modules: HiC2025 (AI), HiC2031 (AO), 24 V DC supply, Hazardous area: spring terminals, blue, Safe area: Yokogawa system connector, 40-pinpa. La información sobre la falta de tensión de alimentación de los módulos de interfaz se pone a disposición del sistema como contacto sin potencial. Los errores de cableado en campo se comunicarán mediante el mismo contacto relé si el módulo de interfaz es compatible con esta función. Las placas terminales cuentan con una carcasa de plástico reforzado con fibra de vidrio de serie. Este diseño permite la instalación rápida y fiable, en un carril de montaje DIN de 35 mm conforme a EN 60715, en el armario.
Parámetros técnicos
| Nominal voltage: | 24 V DC , in consideration of rated voltage of used isolators |
| Voltage drop: | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Ripple: | ≤ 10 % |
| Fusing: | 2 A , in each case for 8 modules |
| Power dissipation: | ≤ 500 mW , without modules |
| Reverse polarity protection: | yes |
| Supply: | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Output type: | volt-free contact |
| Contact loading: | 30 V DC , 1 A |
| Display elements: | LEDs PWR ON (Termination Board power supply) - LED power supply I, green LED - LED power supply II, green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2012 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Ambient temperature: | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP20 |
| Connection: Field side: | explosion hazardous area: spring terminals , blue |
| Connection: Control side: | non-explosion hazardous area: Yokogawa system connector, 40-pin |
| Connection: Supply: | pluggable screw terminals , black |
| Connection: Fault output: | pluggable screw terminals , black |
| Core cross-section: | spring terminals: rigid: 0.2 ... 2.5 mm2 flexible: 0.25 ... 1.5 mm2 |
| Material: | housing: polycarbonate |
| Mass: | approx. 490 g |
| Dimensions: | 205 x 175 x 153 mm (8.1 x 6.9 x 6.02 inch) , height including module assembly |
| Mounting: | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-Type Examination Certificate: | CESI 06 ATEX 022 |
| Connection: Marking: | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Safe area: Maximum safe voltage: | 250 V (Attention! Um is no rated voltage.) |
| Galvanic isolation: Field circuit/control circuit: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000 |
| IECEx approval: | IECEx CES 06.0003 |
| Directive conformity: Approved for: | [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I |
Parámetros logísticos
| ECCN: | |
| País de origen: | Singapur |
| EAN: | 4050143062850 |
| Peso: | 0,90 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |