ER6002-0002
ER6002-0002 | 2-channel serial interface, RS232, RS422/RS485
The ER6002 serial interface module allows the connection of devices with an RS232 or RS422/RS485 interface. The module transmits the data in a fully transparent manner to the higher-level automation device. The data is transferred via the fieldbus using a simple handshake protocol. This does not have any effect on the protocol of the serial interface. The active serial communication channel functions independently of the higher-level bus system in full duplex mode at up to 115,200 baud, while a 864 byte receive buffer and a 128 byte send buffer are available.
| Data transfer channels: | 2 |
| Data transfer rates: | 300…115,200 baud; 9600 baud (8 bit, no parity, 1 stop bit) is preset |
| Number of digital inputs/outputs: | – |
| Connection method: | M12, screw type |
| Nominal voltage: | 24 V DC (-15 %/+20 %) |
| Distributed clocks: | – |
| Bit distortion: | < 3 % |
| Cable length: | RS232: max. 15 m; RS422/RS485: approx. 1000 m |
| Data buffer: | 864 bytes receive buffer, 128 bytes transmit buffer |
| Sensor supply: | +5 V DC, 20 mA each |
| Current consumption from US (without sensor current): | typ. 130 mA + load |
| Power supply connection: | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Bit width in the process image: | per channel: 22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status |
| Electrical isolation: | 500 V |
| Special features: | easy integration of serial end devices |
| Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings: | CE, UL |
| ECCN: | |
| País de origen: | |
| EAN: | |
| Peso: | 0,00 kg |
| Longitud: | 0,00 m |
| Anchura: | 0,00 m |
| Altura: | 0,00 m |