Schmersal
103013909
AZM201Z-ST2-T-1P2PW
Schmersal 103013909
AZM201Z-ST2-T-1P2PW
Beschreibung
Ruhestromprinzip. Manual release. Hilfsentriegelung. Power to unlock. Intelligent diagnosis. Kunststoffgehäuse. Thermoplastic enclosure. Intelligente Diagnose. Zuhaltungs-Überwachung. Guard locking monitored. 3 LEDs to show operating conditions, max. Länge der Sensorkette 200 m, für Dreh- und Schiebetüren geeignet. Max. length of the sensor chain 200 m. 3 LEDs zur Anzeige der Betriebszustände. Suitable for hinged and sliding guards. Self-monitoring series-wiring of 31 sensors, selbstüberwachte Reihenschaltung von 31 Sensoren. RFID-technology for needs-based protection against, tampering. Bedarfsgerechter Manipulationsschutz durch. RFID-Technologie. Sensor-Technik erlaubt Versatz von Betätiger und. Zuhaltung von vertikal ± 5 mm und horizontal ± 3, mm. Sensor technology permits an offset between, actuator and interlock of ± 5 mm vertically and. 3 mm horizontally
Technische Daten
| EAN (European Article Number): | 4030661493374 |
| eCl@ss number, Version 9.0: | 27-27-26-03 |
| general information: | Universal coding |
| Enclosure material: | Glass-fibre, reinforced thermoplastic |
| Weight: | 590 g |
| Time to readiness, maximum: | 4,000 ms |
| Duration of risk, maximum: | 200 ms |
| Power to unlock: | Yes |
| Guard locking monitored: | Yes |
| Manual release: | Yes |
| Short circuit detection: | Yes |
| Short-circuit recognition: | Yes |
| Safety functions: | Yes |
| Integral System Diagnostics, status: | Yes |
| Number of safety contacts: | 2 |
| Performance Level: | e |
| Control category: | 4 |
| PFH-value: | 1.90 x 10-9 /h |
| PFD value: | 1.60 x 10⁻⁴ |
| Safety Integrity Level (SIL): | 3 |
| Mission Time: | 20 Year(s) |
| Performance Level: | d |
| Control category: | 2 |
| PFH-value: | 1.00 x 10⁻⁸ /h |
| PFD value: | 8.90 x 10⁻⁴ |
| Safety Integrity Level (SIL): | 2 |
| Mission Time: | 20 Year(s) |
| Mechanical life, minimum: | 1,000,000 Operations |
| Clamping force in accordance with ISO14119 Fzh: | 2,000 N |
| Clamping force, maximum Fmax: | 2,600 N |
| Latching force: | 30 N |
| Actuating speed, maximum: | 0.2 m/s |
| Terminal Connector: | Connector M12, 8-pole |
| Height of sensor: | 220 mm |
| Length of sensor: | 50 mm |
| Width of sensor: | 40 mm |
| Protection class: | IP66 to IEC 60529 IP67 to IEC 60529 |
| Ambient temperature, minimum: | -25 °C |
| Ambient temperature, maximum: | +60 °C |
| Storage and transport temperature, minimum: | -25 °C |
| Storage and transport temperature, maximum: | +85 °C |
| Relative humidity, minimum: | 30 % |
| Relative humidity, maximum: | 95 % |
| Note (Relative humidity): | non-condensing |
| Resistance to vibrations to EN 60068-2-6: | 10 … 150 Hz, amplitude 0.35 mm |
| Rated impulse withstand voltage: | 0.8 kV |
| Operating voltage, minimum: | 20.4 VDC |
| Operating voltage, maximum: | 26.4 VDC |
| No-load current: | 600 mA |
| Operating current: | 1,200 mA |
| Reaction time of actuator, maximum: | 100 ms |
| Reaction time of input, maximum: | 0.5 ms |
| Switching frequency, approx.: | 1 Hz |
| Rated operating current (safety outputs): | 250 mA |
| Current leakage: | 0.5 mA |
| Operating current (diagnostic output): | 50 mA |
| Note (LED switching conditions display): | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
| PIN 1: | A1 Supply voltage UB |
| PIN 2: | X1 Safety input 1 |
| PIN 3: | A2 GND |
| PIN 4: | Y1 Safety output 1 |
| PIN 5: | OUT Diagnostic output |
| PIN 6: | X2 Safety input 2 |
| PIN 7: | Y2 Safety output 2 |
| PIN 8: | IN Solenoid control |
| Included in delivery: | Actuators must be ordered separately. Triangular key for AZM 201 |
| Note (General): | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
| Note (LED switching conditions display): | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
| PIN 1: | A1 Supply voltage UB |
| PIN 2: | X1 Safety input 1 |
| PIN 3: | A2 GND |
| PIN 4: | Y1 Safety output 1 |
| PIN 5: | OUT Diagnostic output |
| PIN 6: | X2 Safety input 2 |
| PIN 7: | Y2 Safety output 2 |
| PIN 8: | IN Solenoid control |
| Included in delivery: | Actuators must be ordered separately. Triangular key for AZM 201 |
| Recommendation (actuator): | AZ/AZM201-B1 AZ/AZM201-B30 |
| Note (General): | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
Logistische Daten
| ECCN: | |
| Ursprungsland: | DE |
| EAN: | |
| Gewicht: | 0,50 kg |
| Länge: | 0,00 m |
| Breite: | 0,00 m |
| Höhe: | 0,00 m |