101207236
SLC 420-E/R0490-30-RFBMH
Sicherheits-Lichtvorhänge
Schutzart IP67. Protection class IP67. Auflösung 14, 30 und 50 mm. Resolution 14, 30 and 50 mm. Sicherheitstyp 4 gemäß IEC 61496-1. Safety type 4 in accordance with IEC 61496-1. Schutzfeldhöhe von 170 mm … 1770 mm. Protection field height from 170 mm … 1770 mm
Produkt-Typbezeichnung: | SLC 420-E/R0490-30-RFBMH |
Artikelnummer (Bestellnummer): | 101207236 |
Master- or Slave-function: | master |
Zertifikate: | TÜV cULus EAC |
Produktname: | SLC 420 Sicherheits-Lichtvorhang |
Vorschriften: | IEC/EN 61496-1/-2 |
Restart interlock (manual reset): | Yes |
Beam coding available: | Yes |
Reaktionszeit, maximum: | 10 ms |
Kaskadierbar: | Ja |
Integral System Diagnostics: | Yes |
Strahlcodierung: | Ja |
Ausblendfunktion: | Ja |
Performance Level: | e |
Control category to EN13849: | 4 |
PFH-value: | 6.19 x 10-9 /h |
Safety Integrity Level (SIL): | 3 |
Normen, Vorschriften: | ISO 13849-1 IEC 61508 |
Safety type in accordance with IEC 61496-1: | 4 |
Kategorie gemäß EN 13849: | 4 |
Range, protection field, minimum: | 300 mm |
Range, protection field, maximum: | 18,000 mm |
Height of the protection field: | 490 mm |
Wave length of the sensor: | 880 nm |
Detektionsvermögen für Probekörper: | 30 mm |
Reichweite, Schutzfeld, minimum: | 300 mm |
Terminal, Connector, Transmitter: | Connector plug M12, 4-pole |
Höhe des Schutzfeldes: | 490 mm |
Wellenlänge des Sensors: | 880 nm |
Height of sensor: | 575 mm |
Anschluss Stecker, Empfänger: | Einbaustecker M12, 8-polig |
Ambient temperature, minimum: | -10 °C |
Ambient temperature, maximum: | +50 °C |
Storage and transport temperature, minimum: | -25 °C |
Höhe des Sensors: | 575 mm |
Voltage type: | DC (direct current) |
Switching voltage OSSD, HIGH signal: | 24 V |
Umgebungstemperatur, maximum: | +50 °C |
Electrical power consumption of the transmitter: | 4 W |
Cable length (Master/Slave), maximum: | 3 m |
Output current, (fail-safe output), maximum: | 0.5 A |
Spannungsart: | DC (Gleichspannung) |
Note (General): | Im In case of failure (interruption of the 0 V supply) the maximum leakage current is 1 mA. |
Elektrische Leistungsaufnahme vom Empfänger: | 8 W |
Elektrische Leistungsaufnahme des Senders: | 4 W |
Leitungslänge (Master/Slave), maximum: | 3 m |
Ausgangsstrom, maximum: | 0,5 A |
Ausführung: | p-schaltend |
Lieferumfang: | Sender + Empfänger, Befestigungsset |
Empfehlung Sicherheitsschaltgerät: | SRB-E 301 |
Hinweis (Allgemein): | Im Fehlerfall (Unterbrechung der 0 V Leitung) fließt ein max. Leckstrom von 1 mA. |
ECCN: | |
Ursprungsland: | |
EAN: | |
Gewicht: | 0,00 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |