101207215
SLC 420-E/R0570-30-RFBH
Protection class IP67. Schutzart IP67. Auflösung 14, 30 und 50 mm. Resolution 14, 30 and 50 mm. Sicherheitstyp 4 gemäß IEC 61496-1. Safety type 4 in accordance with IEC 61496-1. Schutzfeldhöhe von 170 mm … 1770 mm. Protection field height from 170 mm … 1770 mm
eCl@ss number, Version 9.0: | 27-27-27-04 |
Artikelnummer (Bestellnummer): | 101207215 |
Enclosure material: | Aluminium |
Reaction time, maximum: | 10 ms |
Restart interlock (manual reset): | Yes |
Beam coding available: | Yes |
Hide function: | Yes |
Reaktionszeit, maximum: | 10 ms |
Wiederanlaufsperre: | Ja |
Number of beams: | 28 |
Ausblendfunktion: | Ja |
Integrierte Anzeige, Status: | Ja |
Control category to EN13849: | 4 |
PFH-value: | 6.19 x 10-9 /h |
Anzahl der sicheren digitalen Ausgänge: | 2 |
Normen, Vorschriften: | ISO 13849-1 IEC 61508 |
Performance Level: | e |
Detection ability for test bodies at v = 1.6 m/s: | 30 mm |
Range, protection field, minimum: | 300 mm |
Safety Integrity Level (SIL): | 3 |
Gebrauchsdauer: | 20 Jahre |
Wave length of the sensor: | 880 nm |
Terminal Connector: | Connector |
Reichweite, Schutzfeld, minimum: | 300 mm |
Terminal, Connector, Transmitter: | Connector plug M12, 4-pole |
Length of the connectable cable, maximum: | 100 m |
Wellenlänge des Sensors: | 880 nm |
Anschluss, Stecker: | Steckverbinder |
Protection class: | IP 67 to IEC/EN 60529 |
Ambient temperature, minimum: | -10 °C |
Länge der anschließbaren Leitung, maximum: | 100 m |
Durchmesser des Sensors: | 49 mm |
Storage and transport temperature, maximum: | +70 °C |
Voltage type: | DC (direct current) |
Umgebungstemperatur, minimum: | -10 °C |
Umgebungstemperatur, maximum: | +50 °C |
Electrical power consumption of the transmitter: | 4 W |
Output current, (fail-safe output), maximum: | 0.5 A |
Schutzklasse: | III |
Note (General): | Im In case of failure (interruption of the 0 V supply) the maximum leakage current is 1 mA. |
Schaltspannung OSSD, HIGH-Signal: | 24 V |
Elektrische Leistungsaufnahme vom Empfänger: | 8 W |
Elektrische Leistungsaufnahme des Senders: | 4 W |
Ausgangsstrom, maximum: | 0,5 A |
Ausführung: | p-schaltend |
Lieferumfang: | Sender + Empfänger, Befestigungsset |
Empfehlung Sicherheitsschaltgerät: | SRB-E 301 |
Hinweis (Allgemein): | Im Fehlerfall (Unterbrechung der 0 V Leitung) fließt ein max. Leckstrom von 1 mA. |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 2,87 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |