101207011
SLC 420-E/R0810-14-69-RFB
Protection class IP69K. Schutzart IP69K. Resolution 14 mm and 30 mm. Auflösung 14 mm und 30 mm. Sicherheitstyp 4 gemäß IEC 61496-1. Safety type 4 in accordance with IEC 61496-1. Protection field height from 170 mm … 1450 mm. Schutzfeldhöhe von 170 mm … 1450 mm
| eCl@ss number, Version 9.0: | 27-27-27-04 |
| Artikelnummer (Bestellnummer): | 101207011 |
| eCl@ss Nummer, Version 9.0: | 27-27-27-04 |
| Zertifikate: | TÜV cULus EAC |
| Restart interlock (manual reset): | Yes |
| Vorschriften: | IEC/EN 61496-1/-2 |
| Werkstoff des Gehäuses: | Aluminium |
| Integral System Diagnostics, status: | Yes |
| Integral System Diagnostics: | Yes |
| Number of beams: | 80 |
| Ausblendfunktion: | Ja |
| Performance Level: | e |
| Control category to EN13849: | 4 |
| Anzahl der Strahlen: | 80 |
| Safety Integrity Level (SIL): | 3 |
| Mission Time: | 20 Year(s) |
| Performance Level: | e |
| Detection ability for test bodies at v = 1.6 m/s: | 14 mm |
| Range, protection field, minimum: | 300 mm |
| Safety Integrity Level (SIL): | 3 |
| Gebrauchsdauer: | 20 Jahre |
| Wave length of the sensor: | 880 nm |
| Terminal Connector: | Connector |
| Reichweite, Schutzfeld, minimum: | 300 mm |
| Reichweite, Schutzfeld, maximum: | 7.000 mm |
| Terminal, Connector, Transmitter: | Cable with connector plug M12, 4-pole |
| Length of the connectable cable, maximum: | 100 m |
| Diameter of sensor: | 60 mm |
| Länge der Leitung: | 5 m |
| Protection class: | IP69K to IEC/EN 60529 |
| Anschluss Stecker, Sender: | Leitung mit Stecker M12, 4-polig |
| Ambient temperature, maximum: | +50 °C |
| Storage and transport temperature, minimum: | -25 °C |
| Storage and transport temperature, maximum: | +70 °C |
| Schutzart: | IP69K gemäß IEC/EN 60529 |
| Switching voltage OSSD, HIGH signal: | 24 V |
| Umgebungstemperatur, maximum: | +50 °C |
| Electrical power consumption of the transmitter: | 4 W |
| Lager- und Transporttemperatur, maximum: | +70 °C |
| Schutzklasse: | III |
| Note (General): | Im In case of failure (interruption of the 0 V supply) the maximum leakage current is 1 mA. |
| Schaltspannung OSSD, HIGH-Signal: | 24 V |
| Elektrische Leistungsaufnahme vom Empfänger: | 8 W |
| Elektrische Leistungsaufnahme des Senders: | 4 W |
| Ausgangsstrom, maximum: | 0,5 A |
| Ausführung: | p-schaltend |
| Lieferumfang: | Sender + Empfänger, Befestigungsset |
| Empfehlung Sicherheitsschaltgerät: | SRB-E 301 |
| Hinweis (Allgemein): | Im Fehlerfall (Unterbrechung der 0 V Leitung) fließt ein max. Leckstrom von 1 mA. |
| ECCN: | |
| Ursprungsland: | DE |
| EAN: | |
| Gewicht: | 4,99 kg |
| Länge: | 0,00 m |
| Breite: | 0,00 m |
| Höhe: | 0,00 m |