101206842
SLC 420-E/R1450-14-RFB
Protection class IP67. Schutzart IP67. Auflösung 14, 30 und 50 mm. Resolution 14, 30 and 50 mm. Sicherheitstyp 4 gemäß IEC 61496-1. Safety type 4 in accordance with IEC 61496-1. Protection field height from 170 mm … 1770 mm. Schutzfeldhöhe von 170 mm … 1770 mm
| Produkt-Typbezeichnung: | SLC 420-E/R1450-14-RFB |
| Artikelnummer (Bestellnummer): | 101206842 |
| Product name: | SLC 420 Safety light curtain |
| Enclosure material: | Aluminium |
| Zertifikate: | TÜV cULus EAC |
| Restart interlock (manual reset): | Yes |
| Vorschriften: | IEC/EN 61496-1/-2 |
| Werkstoff des Gehäuses: | Aluminium |
| Integral System Diagnostics, status: | Yes |
| Wiederanlaufsperre: | Ja |
| Number of beams: | 144 |
| Ausblendfunktion: | Ja |
| Integrierte Anzeige, Status: | Ja |
| Integrierte Anzeige, Diagnose: | Ja |
| PFH-value: | 6.19 x 10-9 /h |
| Safety Integrity Level (SIL): | 3 |
| Mission Time: | 20 Year(s) |
| Safety type in accordance with IEC 61496-1: | 4 |
| Detection ability for test bodies at v = 1.6 m/s: | 14 mm |
| Range, protection field, minimum: | 300 mm |
| Range, protection field, maximum: | 7,000 mm |
| Height of the protection field: | 1,450 mm |
| Wave length of the sensor: | 880 nm |
| Detektionsvermögen für Probekörper: | 14 mm |
| Reichweite, Schutzfeld, minimum: | 300 mm |
| Terminal, Connector, Transmitter: | Connector plug M12, 4-pole |
| Höhe des Schutzfeldes: | 1.450 mm |
| Diameter of sensor: | 49 mm |
| Anschluss, Stecker: | Steckverbinder |
| Anschluss Stecker, Empfänger: | Einbaustecker M12, 8-polig |
| Anschluss Stecker, Sender: | Einbaustecker M12, 4-polig |
| Länge der anschließbaren Leitung, maximum: | 100 m |
| Durchmesser des Sensors: | 49 mm |
| Höhe des Sensors: | 1.535 mm |
| Voltage type: | DC (direct current) |
| Umgebungstemperatur, minimum: | -10 °C |
| Electrical power consumption of the receiver: | 8 W |
| Electrical power consumption of the transmitter: | 4 W |
| Output current, (fail-safe output), maximum: | 0.5 A |
| Included in delivery: | Kit with 2 mounting angles |
| Note (General): | Im In case of failure (interruption of the 0 V supply) the maximum leakage current is 1 mA. |
| Schaltspannung OSSD, HIGH-Signal: | 24 V |
| Elektrische Leistungsaufnahme vom Empfänger: | 8 W |
| Elektrische Leistungsaufnahme des Senders: | 4 W |
| Ausgangsstrom, maximum: | 0,5 A |
| Ausführung: | p-schaltend |
| Lieferumfang: | Sender + Empfänger, Befestigungsset |
| Empfehlung Sicherheitsschaltgerät: | SRB-E 301 |
| Hinweis (Allgemein): | Im Fehlerfall (Unterbrechung der 0 V Leitung) fließt ein max. Leckstrom von 1 mA. |
| ECCN: | |
| Ursprungsland: | DE |
| EAN: | |
| Gewicht: | 5,61 kg |
| Länge: | 0,00 m |
| Breite: | 0,00 m |
| Höhe: | 0,00 m |