101174456
SE-P40-NBR10000 VERPACKT GUMMIPROFIL 10M
Approx. 40 mm high, ca. 40 mm hoch. Unempfindlich gegen Umwelteinflüsse. Insensitive to environmental conditions. Schmutz und Feuchtigkeit im Profil werden weitgehend kompensiert. Dirt and moisture in the profile are to a great extent compensated
EAN (European Article Number): | 4030661303758 |
eCl@ss number, Version 9.0: | 27-27-34-01 |
EAN (European Article Number): | 4030661303758 |
eCl@ss Nummer, Version 9.0: | 27-27-34-01 |
Weight: | 3,430 g |
Produktname: | Gummiprofil SE-P40 |
Vorschriften: | EN ISO 13850 |
Werkstoff des Gummiprofils: | NBR Perbunan® |
Length: | 10,000 mm |
Note (General): | In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken. |
Breite: | 25 mm |
Höhe, circa: | 40 mm |
Länge: | 10.000 mm |
Schutzart: | IP67 |
Hinweis (Allgemein): | Der Fingerschutz ist in den Endbereichen der Schaltleiste auf ca. 60 mm (SE 40) oder 50 mm (SE 70) nicht gegeben. Sender bzw. Empfänger werden bei Betätigung dieses Bereiches in die unteren Profilkammer gedrückt, der Schaltbefehl wird ausgelöst, die benötigten Kräfte sind jedoch hoch. Ist diese Einschränkung für die Anwendung nicht akzeptabel, müssen konstruktive Maßnahmen ergriffen werden. |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 3,43 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |