101174454
SE-P40-NBR 2500 VERP.GUMMIPROF.2,5M
Ca. 40 mm hoch, approx. 40 mm high. Insensitive to environmental conditions. Unempfindlich gegen Umwelteinflüsse. Schmutz und Feuchtigkeit im Profil werden weitgehend kompensiert. Dirt and moisture in the profile are to a great extent compensated
EAN (European Article Number): | 4030661303734 |
eCl@ss number, Version 9.0: | 27-27-34-01 |
EAN (European Article Number): | 4030661303734 |
eCl@ss Nummer, Version 9.0: | 27-27-34-01 |
Weight: | 880 g |
Produktname: | Gummiprofil SE-P40 |
Width: | 25 mm |
Werkstoff des Gummiprofils: | NBR Perbunan® |
Length: | 2,500 mm |
Note (General): | In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken. |
Breite: | 25 mm |
Höhe, circa: | 40 mm |
Länge: | 2.500 mm |
Schutzart: | IP67 |
Hinweis (Allgemein): | Der Fingerschutz ist in den Endbereichen der Schaltleiste auf ca. 60 mm (SE 40) oder 50 mm (SE 70) nicht gegeben. Sender bzw. Empfänger werden bei Betätigung dieses Bereiches in die unteren Profilkammer gedrückt, der Schaltbefehl wird ausgelöst, die benötigten Kräfte sind jedoch hoch. Ist diese Einschränkung für die Anwendung nicht akzeptabel, müssen konstruktive Maßnahmen ergriffen werden. |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 0,88 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |