101172168
SE-P70-2500 VERP.GUMMIPROF.2,5M
Approx. 70 mm high, ca. 70 mm hoch. Unempfindlich gegen Umwelteinflüsse. Insensitive to environmental conditions. Dirt and moisture in the profile are to a great extent compensated. Schmutz und Feuchtigkeit im Profil werden weitgehend kompensiert
EAN (European Article Number): | 4030661300245 |
Artikelnummer (Bestellnummer): | 101172168 |
EAN (European Article Number): | 4030661300245 |
Product name: | Rubber profile SE-P70 |
Resistance against permanent deformation: | Good |
Material resistance (acids): | Good |
Note (Material of the rubber profile): | International abbreviation: EPDM, 65 Shore A Chemical name : Ethylene-propylene terpolymer |
Widerstand gegen bleibende Verformung: | gut |
Mechanical life, minimum: | 20,000,000 Operations |
Width: | 25 mm |
Hinweis (Werkstoff des Gummiprofils): | Internationale Kurzbezeichnung: EPDM, 65 Shore A Chemische Bezeichnung : Ethylen-Propylen-Terpolymer |
Length: | 2,500 mm |
Mechanische Lebensdauer, minimum: | 20.000.000 Schaltspiele |
Breite: | 25 mm |
Material temperature resistance (long-term), minimum: | -30 °C |
Länge: | 2.500 mm |
Note (General): | If a higher resistance is required, choose safety edge profiles with 20 µm plastic coating. The coating must be submitted to low mechanical loads only. |
Material resistance (fuel): | Low |
Material resistance (solvents): | low to satisfactory |
Material resistance (oil): | Low |
Werkstofftemperaturbeständigkeit (langfristig), maximum: | +140 °C |
Material resistance, (rebound elasticity at 20 C): | Good |
Werkstoffbeständigkeit (Kraftstoff): | gering |
Werkstoffbeständigkeit (Lösungsmittel): | gering bis befriedigend |
Werkstoffbeständigkeit (ÖL): | gering |
Werkstoffbeständigkeit (Ozon): | ausgezeichnet |
Werkstoffbeständigkeit (Rückprallelastizität bei 20°C): | gut |
Werkstoffbeständigkeit (Witterung): | ausgezeichnet |
ECCN: | |
Ursprungsland: | DE |
EAN: | |
Gewicht: | 1,54 kg |
Länge: | 0,00 m |
Breite: | 0,00 m |
Höhe: | 0,00 m |