View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Weidmueller
2497120000
RCMKIT-I 230VAC 4CO AU
Poproś o ofertę
Prawa autorskie do obrazu: Weidmueller
Weidmueller 2497120000
RCMKIT-I 230VAC 4CO AU
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Type: | RCMKIT-I 230VAC 4CO AU |
| Order No.: | 2497120000 |
| Version: | RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact with test button AgNi 5µm Au, Rated control voltage: 230 V AC, Continuous current: 6 A, Screw connection |
| GTIN (EAN): | 4050118508710 |
| Qty.: | 10 pc(s). |
| Width: | 27.2 mm |
| Width (inches): | 1.071 inch |
| Height: | 77 mm |
| Height (inches): | 3.031 inch |
| Depth: | 78.3 mm |
| Depth (inches): | 3.083 inch |
| Net weight: | 97.45 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 70 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...70 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 230 V AC |
| Rated current AC: | 4.3 mA |
| Power rating: | 1.0 VA |
| Coil resistance: | 19465 Ω ± 15 % |
| Status indicator: | red LED |
| Rated switching voltage: | 240 V AC |
| Max. switching voltage, AC: | 240 V |
| Continuous current: | 6 A |
| Inrush current: | 12 A / 20 ms |
| AC switching capacity (resistive), max.: | 1500 VA |
| DC switching capacity (resistive), max.: | 144 W @ 24 V |
| Switch-on delay: | ≤ 15 ms |
| Min. switching power: | 1 V / 1 mA |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 4 CO contact with test button (AgNi 5µm Au) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Insulating material group: | IIIa |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 4 mm |
| Impulse withstand voltage: | 5 kV (1.2/50 µs) |
| Standards: | DIN EN 50178 |
| Certificate No. (DNVGL): | TAA000011A |
| Wire connection method: | Screw connection |
| Stripping length, rated connection: | 8 mm |
| Tightening torque, min.: | 0.5 Nm |
| Tightening torque, max.: | 0.7 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 1 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire cross-section, solid, min.: | 1 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 1 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 1 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 1 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
| Wire connection cross section, finely stranded, two clampable wires, min.: | 1 mm² |
| Wire cross-section, finely stranded, two clampable wires, max.: | 1.5 mm² |
| Blade size: | size PZ1 |
| Product information: | IP20 without connected conductor at complete opened clamping yoke connection. |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
| Type: | RCMKIT-I 230VAC 4CO AU |
| Order No.: | 2497120000 |
| Version: | RIDERSERIES RCM, Relay module, Number of contacts: 4, CO contact with test button AgNi 5µm Au, Rated control voltage: 230 V AC, Continuous current: 6 A, Screw connection |
| GTIN (EAN): | 4050118508710 |
| Qty.: | 10 pc(s). |
| Width: | 27.2 mm |
| Width (inches): | 1.071 inch |
| Height: | 77 mm |
| Height (inches): | 3.031 inch |
| Depth: | 78.3 mm |
| Depth (inches): | 3.083 inch |
| Net weight: | 97.45 g |
| Humidity: | 40 °C / 93 % rel. humidity, no condensation |
| Operating temperature, max.: | 70 °C |
| Operating temperature, min.: | -40 °C |
| Storage temperature, max.: | 70 °C |
| Storage temperature, min.: | -40 °C |
| Operating temperature: | -40 °C...70 °C |
| Storage temperature: | -40 °C...70 °C |
| REACH SVHC: | Lead 7439-92-1 |
| Rated control voltage: | 230 V AC |
| Rated current AC: | 4.3 mA |
| Power rating: | 1.0 VA |
| Coil resistance: | 19465 Ω ± 15 % |
| Status indicator: | red LED |
| Rated switching voltage: | 240 V AC |
| Max. switching voltage, AC: | 240 V |
| Continuous current: | 6 A |
| Inrush current: | 12 A / 20 ms |
| AC switching capacity (resistive), max.: | 1500 VA |
| DC switching capacity (resistive), max.: | 144 W @ 24 V |
| Switch-on delay: | ≤ 15 ms |
| Min. switching power: | 1 V / 1 mA |
| Max. switching frequency at rated load: | 0.1 Hz |
| Contact type: | 4 CO contact with test button (AgNi 5µm Au) |
| Rail: | TS 35 |
| Test button: | yes (lockable) |
| Mechanical switch position indicator: | Yes |
| Colour: | black |
| Rated voltage: | 250 V |
| Surge voltage category: | III |
| Pollution severity: | 2 |
| Insulating material group: | IIIa |
| Protection degree: | IP20 |
| Creepage and clearance distance input – output: | ≥ 4 mm |
| Impulse withstand voltage: | 5 kV (1.2/50 µs) |
| Standards: | DIN EN 50178 |
| Certificate No. (DNVGL): | TAA000011A |
| Wire connection method: | Screw connection |
| Stripping length, rated connection: | 8 mm |
| Tightening torque, min.: | 0.5 Nm |
| Tightening torque, max.: | 0.7 Nm |
| Clamping range, rated connection: | 2.5 mm² |
| Clamping range, min.: | 1 mm² |
| Clamping range, max.: | 2.5 mm² |
| Wire cross-section, solid, min.: | 1 mm² |
| Wire cross-section, solid, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded, min.: | 1 mm² |
| Wire connection cross section, finely stranded, max.: | 2.5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.: | 1 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.: | 2.5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min.: | 1 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max.: | 2.5 mm² |
| Wire connection cross section, finely stranded, two clampable wires, min.: | 1 mm² |
| Wire cross-section, finely stranded, two clampable wires, max.: | 1.5 mm² |
| Blade size: | size PZ1 |
| Product information: | IP20 without connected conductor at complete opened clamping yoke connection. |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| eClass 9.0: | 27-37-16-01 |
| eClass 9.1: | 27-37-16-01 |
| eClass 10.0: | 27-37-16-01 |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,108 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |