View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Schmersal
101184474
ZQ900-11N
Poproś o ofertę
Prawa autorskie do obrazu: Schmersal
Schmersal 101184474
ZQ900-11N
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Robust design. Metal enclosure. Position indicator. Release push button. Large wiring compartment. External watertight collar. 3 cable entries M 20 x 1.5, wire pull and breakage detection. Twisting of towing eye not possible, one-side operation / wire up to 75 m long
Parametry techniczne
| EAN (European Article Number): | 4030661332796 |
| eCl@ss number, Version 9.0: | 27-37-12-01 |
| Enclosure material: | Zinc die-cast |
| Enclosure coating material: | painted |
| Material of the contacts, electrical: | Silver |
| Material of the cover: | Glass-fibre, thermoplastic |
| Length of the wire, maximum: | 75 m |
| Weight: | 1,246 g |
| Emergency-Stop button: | Yes |
| Indicator lamp: | Yes |
| Number of auxiliary contacts: | 1 |
| Number of safety contacts: | 1 |
| Mission Time: | 20 Year(s) |
| B10d Normally-closed contact (NC): | 100,000 Operations |
| Mechanical life, minimum: | 1,000,000 Operations |
| Terminal Connector: | Screw connection |
| Note (Cable section): | All indications about the cable section are including the conductor ferrules. |
| Height of the Sensor, minimum: | 220.3 mm |
| Height of the Sensor, maximum: | 236.3 mm |
| Length of sensor: | 97.2 mm |
| Width of sensor: | 71.5 mm |
| Protection class: | IP 65 to IEC/EN 60529 |
| Ambient temperature, minimum: | -25 °C |
| Ambient temperature, maximum: | +70 °C |
| Relative humidity, maximum: | 95 % |
| Rated impulse withstand voltage: | 6 kV |
| Thermal test current: | 6 A |
| Utilisation category AC-15: | 230 VAC |
| Utilisation category AC-15: | 4 A |
| Utilisation category DC-13: | 24 VDC |
| Utilisation category DC-13: | 1 A |
| Switching element: | NO contact, NC contact |
| Switching principle: | Snap switch element |
| Note (General): | For lengths of over 10 m, intermediate wire supports must be installed every 3 to 5 m. Recommended cable lengths for pull-wire Emergency-Stop switches in relation to the range of ambient temperature. As the thimbles are subject to deformation in case of wire pull, the wire should be pulled several times after fitting. After that, the wire must be re-tensioned using the eyebolt or the tensioner. The screwed G24-M20 indicator lamp must be ordered separately, see accessories. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | BR |
| EAN: | |
| Waga: | 1,25 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |