View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Schmersal
101153919
SE-100 C AUSWERTEGERAET
Poproś o ofertę
Prawa autorskie do obrazu: Schmersal
Schmersal 101153919
SE-100 C AUSWERTEGERAET
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
1 Signalling output. 1 safety contact, STOP 0. To monitor 1 .. 2 safety edge(s)
Parametry techniczne
| Product type description: | SE-100C |
| Article number (order number): | 101153919 |
| EAN (European Article Number): | 4030661289168 |
| eCl@ss number, Version 9.0: | 27-37-18-19 |
| Certificates: | TÜV cULus EAC |
| Product name: | SE-100C |
| Standards: | ISO 13849-1 EN ISO 13850 |
| Climatic stress: | EN ISO 13856-2 |
| Enclosure material: | Plastic, PE (Black), Crastin (Grey) |
| Weight: | 166 g |
| Time to readiness, maximum: | 300 ms |
| Reaction time, maximum: | 16 ms |
| Stop-Category: | 0 |
| Electronic Fuse: | Yes |
| Wire breakage detection: | Yes |
| Short-circuit recognition: | Yes |
| Automatic reset function: | Yes |
| Reset after disconnection of supply voltage: | Yes |
| Earth connection detection: | Yes |
| Integral System Diagnostics, status: | Yes |
| Number of auxiliary contacts: | 1 |
| Number of LEDs: | 2 |
| Number of safety contacts: | 1 |
| Number of signalling outputs: | 1 |
| Performance Level: | c |
| Control category to EN13849: | 1 |
| Control category to EN954: | 1 |
| PFH-value: | 2.24 x 10⁻⁶ /h |
| Note (PFH-value): | up to max. 5,000 switching cycles/year |
| Mission Time: | 20 Year(s) |
| Mounting: | Snaps onto standard DIN rail to EN 60715 |
| Mechanical life, minimum: | 20,000,000 Operations |
| Terminal Connector: | Screw connection |
| Length of cable: | 200 m |
| Cable section, maximum: | 2 x 1.5 mm² |
| Note (Cable section): | All indications about the cable section are including the conductor ferrules. |
| Width: | 22.5 mm |
| Height: | 100 mm |
| Depth: | 121 mm |
| Protection class of the enclosure: | IP40 |
| Protection class of the Clearance: | IP54 |
| Protection class of Clips or Terminals: | IP20 |
| Ambient temperature, minimum: | +5 °C |
| Ambient temperature, maximum: | +55 °C |
| Resistance to vibrations to EN 60068-2-6: | 10 … 55 Hz, amplitude 0.15 mm |
| Rated impulse withstand voltage: | 4 kV |
| Degree of pollution to VDE 0110: | 2 |
| Rated operating voltage: | 24 VDC +20% / -10% |
| Operating current: | 150 mA |
| Rated AC voltage for controls at DC minimum: | 21.6 VDC |
| Rated control voltage at DC, maximum: | 28.8 VDC |
| Utilisation category AC-15: | 230 VAC |
| Utilisation category AC-15: | 2 A |
| Utilisation category DC-13: | 24 VDC |
| Utilisation category DC-13: | 2 A |
| Electrical power consumption, maximum: | 4 W |
| Indicated operating states: | Safety edge function |
| Note (applications): | Safety edges |
| Note (General): | The overall machine safety depends on the professional mounting and installation of the safety monitoring module and the signal transmitter, as well as on the correct and professional electrical connection of the components. If there it any risk whatsoever, the machine may not be restarted. |
| Note (Wiring diagram): | Monitoring the safety edges SE 40 / SE 70 with a safety monitoring unit SE-100C up to PL c and Category 1. If only one safety edges is connected, the terminals S12/S22 must be bridged. The manual reset function, if required, is realised by the machine control. Both re-initialisation and auto-reset must comply with the requirements of EN 1760-2 (diagram A2, A3). The wiring diagram is shown for the de-energised condition. |
| Hinweis (Allgemein): | Die Gesamtsicherheit der Maschine ist von der fachgerechten Montage und Installation von Sicherheitsbaustein und Signalgeber, sowie von der fachgerechten elektrischen Verbindung der Baugruppen abhängig. Bei bestehender Gefahr darf die Maschine nicht erneut gestartet werden. |
| Hinweis (Schaltungsbeispiel): | Überwachung der Sicherheits-Schaltleisten SE 40 / SE 70 mit einem Sicherheitsbaustein SE-100C bis zu PL c und Kategorie 1. Wird nur eine Sicherheits-Schaltleiste angeschlossen, werden die Klemmen S12/S22 gebrückt. Die manuelle Rückstellfunktion, wenn notwendig, wird in der Maschinensteuerung realisiert. Manueller Reset und Autoreset muss den Anforderungen der EN 1760-2 (Zustandsdiagramm A2, A3) entsprechen. Das Schaltungsbeispiel ist im spannungslosen Zustand dargestellt. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | CZ |
| EAN: | |
| Waga: | 0,17 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |