View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Phoenix Contact
2910519
PLC-RPT- 24DC/21-21/MS
Poproś o ofertę
Phoenix Contact 2910519
PLC-RPT- 24DC/21-21/MS
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Parametry techniczne
| Utilization restriction: | EMC: class A product, see manufacturer's declaration in the download area |
| Width: | 14 mm |
| Height: | 80 mm |
| Depth: | 104 mm |
| Ambient temperature (operation): | -20 °C ... 60 °C |
| Ambient temperature (storage/transport): | -20 °C ... 85 °C |
| Maximum altitude: | ≤ 2000 m |
| Degree of protection: | RT II (Relay) |
| Nominal input voltage UN: | 24 V DC |
| Typical input current at UN: | 18 mA |
| Typical response time: | 10 ms |
| Typical release time: | 10 ms |
| Coil voltage: | 24 V DC |
| Protective circuit: | Free-wheeling diode Damping diode |
| Operating voltage display: | Yellow LED |
| Contact type: | 2 PDT |
| Type of switch contact: | Single contact |
| Contact material: | AgNi |
| Maximum switching voltage: | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage: | 12 V (10 mA) |
| Min. switching current: | 10 mA (12 V) |
| Maximum inrush current: | 12 A (20 ms) |
| Limiting continuous current: | 6 A |
| Interrupting rating (ohmic load) max.: | 192 W (24 V DC) |
| Switching capacity: | 1 A (24 V, DC13) |
| Test voltage relay winding/relay contact: | 4 kV AC (50 Hz, 1 min.) |
| Test voltage PDT/PDT: | 2.5 kV AC (50 Hz, 1 min.) |
| Operating mode: | 100% operating factor |
| Flammability rating according to UL 94: | V0 (Housing) |
| Mechanical service life: | 5x 106 cycles |
| Mounting position: | any |
| Assembly instructions: | In rows with zero spacing |
| Connection name: | Coil side |
| Connection method: | Push-in connection |
| Stripping length: | 8 mm |
| Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG: | 26 ... 14 |
| Connection name: | Contact side |
| Connection method: | Push-in connection |
| Stripping length: | 8 mm |
| Conductor cross section solid: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible: | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG: | 26 ... 14 |
| Designation: | Standards/regulations |
| Standards/regulations: | EN 50178 |
| Rated insulation voltage: | 250 V AC |
| Rated surge voltage: | 6 kV |
| Insulation: | Safe isolation of input/output |
| Pollution degree: | 2 |
| Overvoltage category: | III |
| UL, USA: | UL 508 |
| UL, USA/Canada: | cUL 508 |
| Designation: | UL, USA |
| Identification: | UL 508 |
| Designation: | UL, USA/Canada |
| Identification: | UL 508 |
| China RoHS: | Environmentally Friendly Use Period = 50 years |
| eCl@ss 10.0.1: | 27371601 |
| eCl@ss 5.0: | 27371600 |
| eCl@ss 5.1: | 27371600 |
| eCl@ss 6.0: | 27371600 |
| eCl@ss 7.0: | 27371601 |
| eCl@ss 8.0: | 27371601 |
| eCl@ss 9.0: | 27371601 |
| ETIM 2.0: | EC001437 |
| ETIM 3.0: | EC001437 |
| ETIM 4.0: | EC001437 |
| ETIM 5.0: | EC001437 |
| ETIM 6.0: | EC001437 |
| ETIM 7.0: | EC001437 |
| UNSPSC 6.01: | 30211916 |
| UNSPSC 7.0901: | 39121515 |
| UNSPSC 11: | 39121515 |
| UNSPSC 12.01: | 39121515 |
| UNSPSC 13.2: | 39122334 |
| UNSPSC 18.0: | 39122334 |
| UNSPSC 19.0: | 39122334 |
| UNSPSC 20.0: | 39122334 |
| UNSPSC 21.0: | 39122334 |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,064 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |