View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
325615
ML100-55/25/33/103/115a/154-1M
Poproś o ofertę
Pepperl+Fuchs 325615
ML100-55/25/33/103/115a/154-1M
Retroreflective sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, light on, DC version, PNP output, no controls, fixed cable with M12 plug, No controls, Miniature design, Easy to use, Clearly visible LEDs for Power ON, switching state and weak signal indication, Very bright, highly visible light spotfa. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Parametry techniczne
| Effective detection range: | 0 ... 5 m |
| Reflector distance: | 0.01 ... 5 m |
| Threshold detection range: | 7 m |
| Reference target: | H50 reflector |
| Light source: | LED |
| Light type: | modulated visible red light |
| Polarization filter: | yes |
| Diameter of the light spot: | approx. 500 mm at a distance of 7 m |
| Angle of divergence: | approx. 4 ° |
| Optical face: | frontal |
| Ambient light limit: | EN 60947-5-2:2007+A1:2012 |
| MTTFd: | 860 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: power on |
| Function indicator: | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA |
| Switching type: | light on |
| Signal output: | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 31 mm |
| Housing depth: | 20 mm |
| Degree of protection: | IP67 |
| Connection: | Fixed cable 1000 mm with 4-pin M8 connector |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 30 g |
| Tightening torque, fastening screws: | 0.6 Nm |
| Cable length: | 1 m |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |