View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
321426
HiC2031
Poproś o ofertę
Pepperl+Fuchs 321426
HiC2031
SMART Current Driver
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
1-channel isolated barrier, 24 V DC supply (bus powered), Current output up to 650 Ω load, Low power dissipation, Up to SIL 2 acc. to IEC 61508, Transfer direction: to the fieldpa. This isolated barrier is used for intrinsic safety applications. It repeats the input signal from a control system to drive HART I/P converters, valve actuators, and displays located in a hazardous area. Digital signals are superimposed on the analog values at the field side or control side and are transferred bi-directionally. An open field circuit presents a high impedance to the control side to allow alarm conditions to be monitored by the control system. This device mounts on a HiC termination board.
Parametry techniczne
| Signal type: | Analog output |
| Safety Integrity Level (SIL): | SIL 2 |
| Connection: | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Rated voltage: | 19 ... 30 V DC bus powered via Termination Board |
| Ripple: | ≤ 10 % |
| Rated current: | ≤ 30 mA at 24 V |
| Power dissipation: | ≤ 600 mW at 20 mA and 500 Ω load |
| Power consumption: | ≤ 700 mW |
| Connection side: | control side |
| Connection: | SL1: 8a(+), 7a(-) |
| Input signal: | 4 ... 20 mA , limited to approx. 26 mA |
| Input voltage: | open loop voltage of the control system < 30 V |
| Voltage drop: | approx. 6 V at 20 mA |
| Input resistance: | > 100 kΩ, with field wiring open |
| Connection side: | field side |
| Connection: | SL2: 5a(+), 5b(-) |
| Voltage: | ≥ 13 V at 20 mA |
| Current: | 4 ... 20 mA |
| Load: | 0 ... 650 Ω |
| Ripple: | 20 mV rms |
| Deviation: | at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis |
| : Influence of ambient temperature: | < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) |
| Frequency range: | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) |
| Rise time: | 10 to 90 % ≤ 10 ms |
| Input/Output: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input/power supply: | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
| Output/power supply: | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Display elements: | LED |
| Labeling: | space for labeling at the front |
| Electromagnetic compatibility: Directive 2014/30/EU: | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility: | NE 21:2017 EN 61326-3-2:2018 For further information see system description. |
| Degree of protection: | IEC 60529:2001 |
| Protection against electrical shock: | UL 61010-1:2012 |
| Ambient temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection: | IP20 |
| Mass: | approx. 100 g |
| Dimensions: | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
| Mounting: | on Termination Board |
| Coding: | pin 1 and 3 trimmed For further information see system description. |
| EU-type examination certificate: | CESI 06 ATEX 017 |
| Electromagnetic compatibility: Marking: | II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I |
| Electromagnetic compatibility: Output: | Ex ia |
| Supply: Maximum safe voltage: | 250 V AC (Attention! Um is no rated voltage.) |
| Equipment: | SL2: 5a(+), 5b(-) |
| Supply: Voltage Uo: | 25.2 V |
| Supply: Current Io: | 100 mA |
| Supply: Power Po: | 630 mW |
| Supply: Internal capacitance Ci: | 5.7 nF |
| Supply: Internal inductance Li: | negligible |
| Certificate: | CESI 19 ATEX 027 X |
| Supply: Marking: | II 3G Ex ec IIC T4 Gc |
| Directive conformity: Directive 2014/34/EU: | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015 |
| FM approval: FM certificate: | FM 19 US 0122 X , FM 19 CA 0065 X |
| FM approval: Control drawing: | 116-0470 (cFMus) |
| UL approval: | E106378 |
| FM approval: Control drawing: | 116-0458 (cULus) |
| IECEx approval: IECEx certificate: | IECEx CES 06.0002X |
| IECEx approval: IECEx marking: | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Supplementary information: | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | SG |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |