305666
NBN4-F25-2Z4L-0,14M
Inductive sensor
Series: Double sensor, Housing material: PBT, Output type: 2x 2-wire, Installation: flush mountable, Type of voltage: DC, Connection type: cable PVC , 180 mm, Degree of protection: IP67fa
Switching function: | Normally open (NO) |
Output type: | Two-wire with minimum off-state current |
Rated operating distance: | 4 mm |
Installation: | flush mountable |
Output polarity: | DC |
Assured operating distance: | 0 ... 3.24 mm |
Actual operating distance: | 3.6 ... 4.4 mm typ. |
Reduction factor rAl: | 0.6 |
Reduction factor rCu: | 0.45 |
Reduction factor r304: | 1 |
Reduction factor rSt37: | 1.2 |
Output type: | 2x 2-wire |
Operating voltage: | 5 ... 30 V DC |
Switching frequency: | 0 ... 500 Hz |
Hysteresis: | typ. 5 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | pulsing |
Voltage drop: | ≤ 4.5 V |
Operating current: | 4 ... 100 mA |
Off-state current: | 120 ... 200 µA typ. 175 µA at 25 °C |
Time delay before availability: | ≤ 100 ms |
Switching state indicator: | LED, yellow |
Standard conformity: Standards: | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
UL approval: | cULus Listed |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | cable PVC , 180 mm |
Core cross-section: | 0.14 mm2 |
Housing material: | PBT |
Sensing face: | PC |
Degree of protection: | IP67 |
Cable: Cable diameter: | 3 mm + 0.3 mm |
Cable: Bending radius: | > 10 x cable diameter |
Mass: | 405 g |
Tightening torque, fastening screws: | M5 x 25 : 2.7 Nm |
Note: | Mounted on mechanical drive |
ECCN: | |
Kraj pochodzenia: | Tscheschische Republik |
EAN: | 4050143051960 |
Waga: | 0,08 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |