301502
VBA-2E2A-G10-Z/E2J-1M-V15-G
AS-Interface sensor/actuator module
The AS-Interface G10 ultra-compact module is suitable for the remote connection of mech. switches and actuators within very limited space. The one-piece enclosure has the protection degree IP68/IP69K. G10 ultra compact module. 2 inputs, 2 outputsfa. The AS-Interface flat cable is contacted via pointy, gold-plated contact pins. The exact location of the pins on the lead is ensured by the swivel mechanism. Mech. switches and actuators are connected to the module via M12 sockets. Multiple LEDs indicate the current status of the AS-Interface strand and are used for diagnosis
Slave type: | A/B slave |
AS-Interface specification: | V3.0 |
Required master specification: | V3.0 |
UL File Number: | E223772 "For use in NFPA 79 Applications only" |
MTBF: | 379 a |
LED FAULT: | error display; LED red red: communication error or address is 0 red flashing: overload |
LED PWR: | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
Rated operating voltage: | 18.5 ... 31.6 V from AS-Interface |
Rated operating current: | ≤ 40 mA (without inputs/outputs) / max. 200 mA |
Protection class: | III |
Surge protection: | Ue: Over voltage category III, safe isolated power supplies (PELV) |
Number/Type: | 2 inputs for mechanical contacts |
Supply: | from AS-Interface |
Voltage: | ≤ Ue |
Input current: | ≤ 8 mA (limited internally) |
Switching point: 0 (unattenuated): | ≤ 0.5 mA |
Switching point: 1 (attenuated): | ≥ 2 mA |
Signal delay: | < 1 ms (input/AS-Interface) |
Number/Type: | 2 electronic outputs, PNP, overload and short-circuit proof |
Supply: | from AS-Interface |
Voltage: | ≥ (Ue - 9.0 V) |
Current loading capacity: | ≤ 150 mA Total current , overload and short-circuit protected |
Electromagnetic compatibility: Directive 2014/30/EU: | EN 62026-2:2013 |
Degree of protection: | EN 60529:2000 |
Fieldbus standard: | EN 62026-2:2013 |
Emitted interference: | EN 61000-6-4:2011 |
AS-Interface: | EN 62026-2:2013 |
Noise immunity: | EN 61000-6-2:2005 , EN 62026-2:2013 |
Profile: | S-7.A.7 |
IO code: | 7 |
ID code: | A |
ID1 code: | 7 |
ID2 code: | 7 |
Data bits (function via AS-Interface): | input output |
Electromagnetic compatibility: D0: | IN1 OUT1 |
Electromagnetic compatibility: D1: | IN2 OUT2 |
Electromagnetic compatibility: D2: | IN1 OUT1 |
Electromagnetic compatibility: D3: | IN2 OUT2 |
Parameter bits (programmable via AS-i): | function |
Electromagnetic compatibility: P0: | communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition |
Electromagnetic compatibility: P1: | Input filter P1 = 0 input filter on, pulse suppression ≤ 2 ms P1 = 1 input filter off (default settings) |
Electromagnetic compatibility: P2: | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (default settings) |
Electromagnetic compatibility: P3: | not used |
UL approval: | cULus Listed, Type 1 enclosure |
Ambient temperature: | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Shock and impact resistance: | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
Vibration resistance: | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
Degree of protection: | housing: IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* M12 socket: IP67/IP68/IP69K |
Connection: | AS-Interface: AS-Interface flat cable In-/outputs & matching connector: M12 connector, 5-pin, A-coded, acc. to IEC 61076-2-101:2012 |
Material: Contacts: | CuSn / Au |
Material: Housing: | PBT PC |
Material: Body: | black PUR |
Material: Cable: | PUR |
Material: Mounting screw: | Stainless steel 1.4305 / AISI 303 |
Cable: Sheath diameter: | ∅4.8 mm |
Cable: Color: | black |
Cable: Cores: | 5 x 0.34 mm2 |
Cable: Length: | 1 m |
Mass: | 84 g |
Tightening torque, fastening screws: | 1.65 Nm |
Tightening torque, cable gland: | 0.4 Nm |
ECCN: | |
Kraj pochodzenia: | ID |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |