Pepperl+Fuchs 295670-100087

OBR25M-R201-2EP-IO-L

Laser retroreflective sensor

Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"

Opis

The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks. Laser retroreflective sensor, Medium design with versatile mounting options, DuraBeam Laser Sensors - durable and employable like an LED, Extended temperature range. 40°C ... 60°C, High degree of protection IP69K, IO-link interface for service and process datafa. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.

Parametry techniczne

Effective detection range: 0 ... 25 m
Reflector distance: 0.5 ... 25 m
Threshold detection range: 33 m
Reference target: H85-2 reflector
Light source: laser diode
Light type: modulated visible red light
Polarization filter: yes
Laser nominal ratings: Note: LASER LIGHT , DO NOT STARE INTO BEAM
Laser nominal ratings: Laser class: 1
Laser nominal ratings: Wave length: 680 nm
Laser nominal ratings: Beam divergence: > 5 mrad d63 < 2 mm in the range of 250 mm ... 750 mm
Laser nominal ratings: Pulse length: 1.6 µs
Laser nominal ratings: Repetition rate: max. 17.6 kHz
Laser nominal ratings: max. pulse energy: 9.6 nJ
Diameter of the light spot: approx. 50 mm at a distance of 25 m
Angle of divergence: approx. 0.1 °
Ambient light limit: EN 60947-5-2 : 60000 Lux
MTTFd: 672 a
Mission Time (TM): 20 a
Diagnostic Coverage (DC): 0 %
Operation indicator: LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode
Function indicator: Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve
Control elements: Light-on/dark-on changeover switch
Control elements: sensitivity adjustment
Operating voltage: 10 ... 30 V DC
Ripple: max. 10 %
No-load supply current: < 15 mA at 24 V Operating voltage
Protection class: III
Interface type: IO-Link ( via C/Q = BK )
Device profile: Identification and diagnosis Smart Sensor type 2.4
Transfer rate: COM 2 (38.4 kBaud)
IO-Link Revision: 1.1
Min. cycle time: 2.3 ms
Process data width: Process data input 2 Bit Process data output 2 Bit
SIO mode support: yes
Device ID: 0x111212 (1118738)
Compatible master port type: A
Switching type: The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
Signal output: 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage: max. 30 V DC
Switching current: max. 100 mA , resistive load
Usage category: DC-12 and DC-13
Voltage drop: ≤ 1.5 V DC
Switching frequency: 2000 Hz
Response time: 250 µs
Communication interface: IEC 61131-9
Product standard: EN 60947-5-2
Laser safety: EN 60825-1:2014
UL approval: E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval: CCC approval / marking not required for products rated ≤36 V
FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient temperature: -40 ... 60 °C (-40 ... 140 °F) , fixed cable -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Storage temperature: -40 ... 70 °C (-40 ... 158 °F)
Housing width: 15 mm
Housing height: 61.7 mm
Housing depth: 41.7 mm
Degree of protection: IP67 / IP69 / IP69K
Connection: 2 m fixed cable
Material: Housing: PC (Polycarbonate)
Material: Optical face: PMMA
Mass: approx. 83 g
Cable length: 2 m

Parametry logistyczne

ECCN:
Kraj pochodzenia: SG
EAN:
Waga: 0,00 kg
Długość: 0,00 m
Szerokość: 0,00 m
Wysokość: 0,00 m