288264
NMN10-12GH50-E2
Inductive sensor
Series: Cylindrical type, Housing material: Stainless steel 1.4435 / AISI 316L, Output type: 3-wire, Installation: non-flush, Type of voltage: DC, Connection type: cable TPE-S , 2 m, Degree of protection: IP68 / IP69Kfa
| Switching function: | Normally open (NO) |
| Output type: | PNP |
| Rated operating distance: | 10 mm |
| Installation: | non-flush |
| Output polarity: | DC |
| Assured operating distance: | 0 ... 8.1 mm |
| Reduction factor rAl: | 1 |
| Reduction factor rCu: | 0.8 |
| Reduction factor r304: | 0.5 (0.7 of material thickness 2 mm) |
| Reduction factor rSt37: | 1 |
| Output type: | 3-wire |
| Installation conditions: A: | 22 mm (mild steel) 21 mm (stainless steel) 13 mm (aluminum) 15 mm (brass) |
| Installation conditions: B: | 24 mm |
| Installation conditions: C: | 30 mm |
| Installation conditions: F: | 120 mm |
| Operating voltage: | 10 ... 30 V |
| Switching frequency: | 0 ... 400 Hz |
| Hysteresis: | 3 ... 15 typ. 5 % |
| Reverse polarity protection: | yes |
| Short-circuit protection: | yes |
| Voltage drop: | ≤ 2 V |
| Operating current: | 0 ... 200 mA |
| Off-state current: | ≤ 0.1 mA |
| No-load supply current: | ≤ 10 mA |
| Switching state indicator: | LED, yellow |
| Operating pressure statically: | 80 bar (1160.3 psi) max. |
| MTTFd: | 652 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| UL approval: | cULus Listed, General Purpose |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 85 °C (-13 ... 185 °F) |
| Connection type: | cable TPE-S , 2 m |
| Housing material: | Stainless steel 1.4435 / AISI 316L |
| Sensing face: | Stainless steel 1.4435 / AISI 316L |
| Degree of protection: | IP68 / IP69K |
| Mass: | 86 g |
| ECCN: | |
| Kraj pochodzenia: | Ungarn |
| EAN: | 4050143048939 |
| Waga: | 0,09 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |