View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Pepperl+Fuchs
287035
UMC3000-30H-E5-5M-3G-3D
Poproś o ofertę
Pepperl+Fuchs 287035
UMC3000-30H-E5-5M-3G-3D
Ultrasonic sensor
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Single head system, ATEX-approval for zone 2 and zone 22, Front of transducer and housing manufactured entirely from stainless steel, Degree of protection IP68 / IP69K, Series: -30H, Housing: stainless steel 1.4404 / AISI 316L. LED window: VMQ Elastosil LR 3003/Shore 50 A, Connection type: cable PUR , 5 m fa. The enclosure and transducer of this ultrasonic sensor form a hermetically sealed unit. For reliable operation, due to the special design of this sensor, solely the enclosed mounting accessories must be used. If the sensor is used in hazardous (classified) location, it will be necessary to follow the notes of the instruction manual.
Parametry techniczne
| Sensing range: | 200 ... 3000 mm |
| Adjustment range: | 240 ... 3000 mm |
| Dead band: | 0 ... 200 mm |
| Standard target plate: | 100 mm x 100 mm |
| Transducer frequency: | approx. 100 kHz |
| Response delay: | ≤ 200 ms |
| LED green: | Operating display |
| LED yellow: | switching state |
| LED red: | error |
| Operating voltage: | 10 ... 30 V DC |
| No-load supply current: | ≤ 50 mA |
| Input/output type: | 1 synchronization connection, bidirectional |
| : 0 Level: | 0 ... 1 V |
| : 1 Level: | 4 V ... UB |
| : Input impedance: | > 12 kΩ |
| : Output rated operating current: | < 12 mA |
| : Pulse length: | ≥ 200 µs |
| : Pulse interval: | ≥ 2 ms |
| Synchronization frequency: Common mode operation: | ≤ 20 Hz |
| Synchronization frequency: Multiplex operation: | ≤ 20/n Hz, n = number of sensors n ≤ 10 (factory setting: 5 ) |
| Input type: | 1 program input |
| Level (switch point 1): | 0 ... 1 V |
| Level (switch point 2): | 4 V ... UB |
| Input impedance: | > 10 kΩ |
| Pulse length: | 2 ... 5 s |
| Output type: | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current: | 200 mA , short-circuit/overload protected |
| Voltage drop: | ≤ 2 V |
| Repeat accuracy: | ≤ 0.1 % of full-scale value |
| Switching frequency: | ≤ 2.8 Hz |
| Range hysteresis: | programmable , preset to 1 mm |
| Temperature influence: | < 1.5 % of full-scale value |
| Standard conformity: Standards: | EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature: | -25 ... 60 °C (-13 ... 140 °F) |
| Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type: | cable PUR , 5 m |
| Core cross-section: | 5 x 0.5 mm2 |
| Degree of protection: | IP68 / IP69K |
| Material: Housing: | stainless steel 1.4404 / AISI 316L LED window: VMQ Elastosil LR 3003/Shore 50 A |
| Material: Transducer: | Stainless steel 1.4435 / AISI 316L |
| Mass: | 425 g |
| Output: | near switch point: 240 mm far switch point: 3000 mm output function: Window mode output behavior: NO contact |
| CE marking: | [*PD-Z02586A*] |
| ATEX marking: | II 3D Ex tc IIIC T80°C Dc X |
| Directive conformity: | 2014/34/EU |
| Standards: | EN 60079-0:2012+A11:2013 , EN 60079-31:2014 |
| Supplementary information: | Switch settings of the external programming adapter: "output load": pull-down "output logic": inv |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |