283416-0001
NBB15-30GM50-EI-M1
Inductive sensor
Series: Cylindrical type, Housing material: brass, nickel-plated, Output type: 3-wire, Installation: flush, Type of voltage: DC, Connection type: cable PUR , 2 m, Degree of protection: IP68 / IP69Kfa
Output type: | Digital current output |
Rated operating distance: | 15 mm |
Installation: | flush |
Output polarity: | DC |
Assured operating distance: | 0 ... 12.15 mm |
Actuating element: | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 45 mm x 45 mm x 1 mm |
Reduction factor rAl: | 0.5 |
Reduction factor rCu: | 0.4 |
Reduction factor r304: | 0.7 |
Reduction factor rBrass: | 0.5 |
Output type: | 3-wire |
Operating voltage: | 9 ... 30 V DC |
Switching frequency: | 0 ... 700 Hz |
Hysteresis: | 2 ... 15 % |
Reverse polarity protection: | reverse polarity protected |
Short-circuit protection: | yes |
Temperature drift: | ≤ 10 % |
Load resistor: | 100 ... 250 Ohm |
Switching state indicator: | LED, yellow |
MTTFd: | 1556 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Output type: | object detected: 10 mA ± 1 mA object not detected: 5 mA ± 1 mA |
UL approval: | cULus Listed, General Purpose, Class 2 Power Source |
E1 Type approval: | 10R-04 |
Ambient temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Storage temperature: | -40 ... 85 °C (-40 ... 185 °F) |
Connection type: | cable PUR , 2 m |
Core cross-section: | 3 x 0.34 mm2 |
Housing material: | brass, nickel-plated |
Sensing face: | PBT |
Degree of protection: | IP68 / IP69K |
Mass: | 174 g |
Scope of delivery: | 2 self locking nuts in scope of delivery |
ECCN: | |
Kraj pochodzenia: | Tscheschische Republik |
EAN: | 4050143048526 |
Waga: | 0,18 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |