Pepperl+Fuchs
226771
ML100-6-IR/95/102
Pepperl+Fuchs 226771
ML100-6-IR/95/102
Retroreflective sensor
Opis
Retroreflective sensor without polarization filter, plastic housing, 5 m detection range, infrared light, sensitivity adjuster, light/dark on, DC version, NPN output, M8 plug, User-friendliest photoelectric sensor series for standard applications, Miniature design, Not sensitive to ambient light, Metal-reinforced fastening holes, Version with infrared lightfa. Small, robust and reliable, the ML8 series of miniature sensors is particularly suitable for non-contact detection of objects in confined spaces. The LED indicator is located behind the lens and provides reliable information on the sensor's operating status. The LED is always visible, even if the sensor is completely embedded. Flexible mounting options and fixed preset detection ranges simplify setup and operation.
Parametry techniczne
| Effective detection range: | 0 ... 5 m |
| Reflector distance: | 0.01 ... 5 m |
| Threshold detection range: | 7 m |
| Reference target: | H50 reflector |
| Light source: | IRED |
| Light type: | modulated infrared light |
| Polarization filter: | no |
| Diameter of the light spot: | approx. 500 mm at a distance of 7 m |
| Angle of divergence: | approx. 4 ° |
| Optical face: | frontal |
| Ambient light limit: | EN 60947-5-2:2007+A1:2012 |
| MTTFd: | 860 a |
| Mission Time (TM): | 20 a |
| Diagnostic Coverage (DC): | 0 % |
| Operation indicator: | LED green: power on |
| Function indicator: | LED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted |
| Control elements: | sensitivity adjustment |
| Control elements: | Light-on/dark-on changeover switch |
| Operating voltage: | 10 ... 30 V DC |
| Ripple: | max. 10 % |
| No-load supply current: | < 20 mA |
| Switching type: | The switching type of the sensor is adjustable. The default setting is: light on |
| Signal output: | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Switching voltage: | max. 30 V DC |
| Switching current: | max. 100 mA , resistive load |
| Voltage drop: | ≤ 1.5 V DC |
| Switching frequency: | 1000 Hz |
| Response time: | 0.5 ms |
| Product standard: | EN 60947-5-2 |
| UL approval: | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
| CCC approval: | CCC approval / marking not required for products rated ≤36 V |
| UN/ECE Regulation No. 10 (E1): | Type-approval number: 047350 |
| Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
| Housing width: | 11 mm |
| Housing height: | 31 mm |
| Housing depth: | 20 mm |
| Degree of protection: | IP67 |
| Connection: | Connector M8 x 1 , 4-pin |
| Material: Housing: | PC (Polycarbonate) |
| Material: Optical face: | PMMA |
| Mass: | approx. 10 g |
| Tightening torque, fastening screws: | 0.6 Nm |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | VN |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |