220264
M100/MV100-IR/76b/102/115
Thru-beam sensor
Thru-beam sensor, 15 m detection range, infrared light, light/dark on, DC version, NPN output, sensitivity adjuster, emitter switch-off, fixed cable, Miniature design, Easy to use, Full metal thread mounting, Highly visible LEDs for Power ON and switching state, Not sensitive to ambient lightfa. The ML100 series is characterized by its miniature housing with integral, all-metal threaded bushings. All versions are equipped with a visible red transmitter LED. This greatly simplifies installation and commissioning. The switching states are easily visible from all directions thanks to the highly visible LEDs.
Emitter: | M100-IR/76b/115 |
Receiver: | MV100-IR/102/115 |
Effective detection range: | 0 ... 15 m |
Threshold detection range: | 20 m |
Light source: | IRED |
Light type: | modulated infrared light |
Diameter of the light spot: | approx. 1.5 m at a distance of 20 m |
Angle of divergence: | approx. 2 ° |
Optical face: | frontal |
Ambient light limit: | EN 60947-5-2 |
MTTFd: | 860 a |
Mission Time (TM): | 20 a |
Diagnostic Coverage (DC): | 0 % |
Operation indicator: | LED green: power on |
Function indicator: | Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted |
Control elements: | sensitivity adjustment |
Control elements: | Light-on/dark-on changeover switch |
Operating voltage: | 10 ... 30 V DC |
Ripple: | max. 10 % |
No-load supply current: | Emitter: ≤ 15 mA Receiver: ≤ 8 mA |
Test input: | emitter deactivation at 0 V |
Switching type: | The switching type of the sensor is adjustable. The default setting is: light-on |
Signal output: | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage: | max. 30 V DC |
Switching current: | max. 100 mA , resistive load |
Voltage drop: | ≤ 1.5 V DC |
Switching frequency: | 250 Hz |
Response time: | 2 ms |
Product standard: | EN 60947-5-2 |
UL approval: | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -30 ... 60 °C (-22 ... 140 °F) |
Storage temperature: | -40 ... 70 °C (-40 ... 158 °F) |
Housing width: | 11 mm |
Housing height: | 31 mm |
Housing depth: | 20 mm |
Degree of protection: | IP67 |
Connection: | 2 m fixed cable |
Material: Housing: | PC (Polycarbonate) |
Material: Optical face: | PMMA |
Mass: | approx. 100 g (emitter and receiver) |
Tightening torque, fastening screws: | 0.6 Nm |
Cable length: | 2 m |
ECCN: | |
Kraj pochodzenia: | VN |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |