106673
NJ15+U2+N
Inductive sensor
Series: VariKont ®, Housing material: PBT, Output type: 2-wire, Installation: flush, Type of voltage: DC, Connection type: screw terminals, Degree of protection: IP68fa
Switching function: | Normally closed (NC) |
Output type: | NAMUR |
Rated operating distance: | 15 mm |
Installation: | flush |
Assured operating distance: | 0 ... 12.15 mm |
Reduction factor rAl: | 0.4 |
Reduction factor rCu: | 0.3 |
Reduction factor r304: | 0.85 |
Output type: | 2-wire |
Nominal voltage: | 8 V |
Switching frequency: | 0 ... 120 Hz |
Current consumption: Measuring plate not detected: | min. 3 mA |
Current consumption: Measuring plate detected: | ≤ 1 mA |
Standard conformity: NAMUR: | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
Standard conformity: Standards: | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
FM approval: Control drawing: | 116-0165 |
UL approval: | cULus Listed, General Purpose |
CSA approval: | cCSAus Listed, General Purpose |
CCC approval: | CCC approval / marking not required for products rated ≤36 V |
Ambient temperature: | -25 ... 100 °C (-13 ... 212 °F) |
Connection type: | screw terminals |
Information for connection: | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Core cross-section: | up to 2.5 mm2 |
FM approval: Minimum core cross-section: | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 |
FM approval: Maximum core cross-section: | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 |
Housing material: | PBT |
Sensing face: | PBT |
Degree of protection: | IP68 |
Use in the hazardous area: | see instruction manuals |
ECCN: | |
Kraj pochodzenia: | DE |
EAN: | |
Waga: | 0,00 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |