ZB0038
AS-Interface motor starter for three-phase motors. PowerSwitch 4A 1,5KW
User-friendly starting and switching of three-phase motors. Reliable overload and short-circuit protection. With AS-i interface. Reversing contactor circuit for two directions. Clearly visible LEDs for indicating operation, function and switching status
| Operating voltage [V]: | 26.5...31.6 DC |
| Max. current consumption from AS-i [mA]: | 250 |
| Max. current load total [A]: | 0.3 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital inputs: 4; Number of digital outputs: 4 |
| Number of digital inputs: | 4 |
| Input circuit of digital inputs: | PNP |
| Sensor supply of the inputs: | AS-i |
| Voltage supply [V]: | 20...30 |
| Max. total current rating of inputs [mA]: | 140 |
| Input current High [mA]: | 6...10 |
| Input current Low [mA]: | 0...2 |
| Min. switching level high signal [V]: | 10 |
| Digital inputs protected against short circuits: | yes |
| Electrical design: | AS-i |
| Number of digital outputs: | 4 |
| Voltage range DC [V]: | 18...30; (to PELV) |
| Voltage range AC [V]: | 110...400 |
| Max. current load per output [mA]: | 150; (external outputs: Short-circuit proof; reversing contactor: not protected against short circuits) |
| Electrically separated: | yes |
| Ambient temperature [°C]: | 0...60 |
| Protection: | IP 54 |
| EMC: | EN 50081-1 EN 61000-6-2 |
| AS-i version: | 2.0 |
| Extended addressing mode possible: | no |
| AS-i profile: | S-7.0 |
| AS-i I/O configuration [hex]: | 7 |
| AS-i ID code [hex]: | 0 |
| Weight [g]: | 1846 |
| Type of mounting: | backplane mounting |
| Dimensions [mm]: | 180 x 182 x 90 |
| Materials: | PC glass fibre reinforced; flame-retardant; UV resistant |
| Display: | switching status LED, yellow operation LED, green errors LED, red |
| switching status: | LED, yellow |
| operation: | LED, green |
| errors: | LED, red |
| Remarks: | The PowerSwitch motor starter uses two outputs to trigger the reversing contactors (motor right/left/off). Two further outputs can be connected at will. The messages "motor protection activated" and "hand-held operating panel connected" are indicated via the input data bits. Sensors can be connected to two additional inputs. |
| Pack quantity: | 1 pcs. |
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 1,85 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |