View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
SV5610
Poproś o ofertę
Ifm SV5610
Vortex flow meter with display. SVN12XXXIRKG/US-100
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Reliable detection of flow and medium temperature. With switching output or frequency output and IO-Link. Display can be rotated for optimum alignment. Clearly readable colour display with red/green colour change. Suitable for water, deionised water and cooling water
Parametry techniczne
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Process connection: | threaded connection 1/2" NPT DN10 |
| Measuring range [°F]: | 14...194 |
| Special feature: | Gold-plated contacts |
| Application: | for industrial applications |
| Media: | water |
| Pressure rating [bar]: | 12 |
| Pressure rating [psi]: | 174 |
| Note on pressure rating: | up to 40 °C |
| MAWP (for applications according to CRN) [bar]: | 4.8 |
| Operating voltage [V]: | 18...30 DC |
| Current consumption [mA]: | < 30 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | < 3 |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; frequency signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Short-circuit protection: | yes |
| Overload protection: | yes |
| Measuring range: | 32...634 gph 0.55...10.55 gpm |
| 32...634 gph: | 0.55...10.55 gpm |
| Display range: | 0...760 gph 0...12.7 gpm |
| 0...760 gph: | 0...12.7 gpm |
| Resolution: | 2 gph 0.05 gpm |
| 2 gph: | 0.05 gpm |
| Set point SP: | 38...634 gph 0.65...10.55 gpm |
| 38...634 gph: | 0.65...10.55 gpm |
| Reset point rP: | 32...628 gph 0.55...10.45 gpm |
| 32...628 gph: | 0.55...10.45 gpm |
| Frequency end point, FEP: | 126...634 gph 2.1...10.55 gpm |
| 126...634 gph: | 2.1...10.55 gpm |
| In steps of: | 2 gph 0.05 gpm |
| 2 gph: | 0.05 gpm |
| Frequency at the end point FRP [Hz]: | 100...1000 |
| Measuring dynamics: | 1:20 |
| Measuring range [°F]: | 14...194 |
| Display range [°F]: | -22...230 |
| Resolution [°F]: | 1 |
| Set point SP [°F]: | 16...194 |
| Reset point rP [°F]: | 14...192 |
| In steps of [°F]: | 1 |
| Frequency start point, FSP [°F]: | 14...158 |
| Frequency end point, FEP [°F]: | 50...194 |
| Frequency at the end point FRP [Hz]: | 100...1000 |
| Accuracy (in the measuring range): | ± 2 % MEW |
| Repeatability: | ± 0,5 % MEW |
| Accuracy [K]: | ± 1 |
| Response time [s]: | 1; (dAP = 0) |
| Damping for the switching output dAP [s]: | 0...5 |
| Dynamic response T05 / T09 [s]: | T09 = 6 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; frequency output; switch-on/switch-off delay; Damping; Display unit |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 490 d / 00 01 EA h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 2 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 3 |
| Ambient temperature [°F]: | 32...140 |
| Note on ambient temperature: | medium temperature < 176 °F medium temperature < 194 °F: 32...122 °F |
| Storage temperature [°F]: | -4...176 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Shock resistance: | DIN EN 60068-2-27 5 g (11 ms) |
| DIN EN 60068-2-27: | 5 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 with water / 10...50 Hz 1 mm with water / 50...2000 Hz 2 g |
| DIN EN 60068-2-6: | with water / 10...50 Hz 1 mm |
| MTTF [years]: | 342 |
| UL approval: | UL Approval no. I001 |
| UL Approval no.: | I001 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 468 |
| Materials: | stainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM |
| Tightening torque [Nm]: | 30 |
| Process connection: | threaded connection 1/2" NPT DN10 |
| Remarks: | MW = measured value MEW = Final value of the measuring range |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | US |
| EAN: | |
| Waga: | 0,47 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |