View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
SM2604
Poproś o ofertę
Ifm SM2604
Magnetic-inductive flow meter. SMN21XGX50KG/US-100
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Precise measurement of flow, consumption and medium temperature. High accuracy, repeatability and measurement dynamics. For use in water cooling circuits. With two precise analogue outputs. Clearly visible 4-digit LED display
Parametry techniczne
| Number of inputs and outputs: | Number of analogue outputs: 2 |
| Process connection: | threaded connection 2" NPT DN50 |
| Measuring range: | -20...80 °C -4...176 °F |
| -20...80 °C: | -4...176 °F |
| Special feature: | Gold-plated contacts |
| Application: | empty pipe detection; for industrial applications |
| Media: | conductive liquids; water; hydrous media |
| Note on media: | conductivity: ≥ 20 µS/cm viscosity: < 70 mm²/s (40 °C) |
| Medium temperature: | -10...70 °C 14...158 °F |
| -10...70 °C: | 14...158 °F |
| Pressure rating [bar]: | 16 |
| Pressure rating [Mpa]: | 1.6 |
| Pressure rating [psi]: | 232 |
| MAWP (for applications according to CRN) [bar]: | 16.5 |
| Operating voltage [V]: | 18...32 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 150 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 5 |
| Number of inputs and outputs: | Number of analogue outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | analogue signal; IO-Link; (configurable) |
| Number of analogue outputs: | 2 |
| Analogue current output [mA]: | 4...20; (≤ 22 mA) |
| Max. load [Ω]: | 500 |
| Measuring range: | 5...600 l/min 0.3...36 m³/h 80...9510 gph 1.3...158.5 gpm |
| 5...600 l/min: | 0.3...36 m³/h |
| Display range: | -720...720 l/min -43.2...43.2 m³/h -11410...11410 gph -190.2...190.2 gpm |
| -720...720 l/min: | -43.2...43.2 m³/h |
| Resolution: | 0.5 l/min 0.02 m³/h 5 gph 0.1 gpm |
| 0.5 l/min: | 0.02 m³/h |
| Analogue start point ASP: | 0...480 l/min 0...28.8 m³/h 0...7610 gph 0...126.8 gpm |
| 0...480 l/min: | 0...28.8 m³/h |
| Analogue end point AEP: | 120...600 l/min 7.2...36 m³/h 1900...9510 gph 31.7...158.5 gpm |
| 120...600 l/min: | 7.2...36 m³/h |
| Low flow cut-off LFC: | < 15 l/min < 0.9 m³/h < 240 gph < 4 gpm |
| < 15 l/min: | < 0.9 m³/h |
| In steps of: | 0.5 l/min 0.02 m³/h 5 gph 0.1 gpm |
| 0.5 l/min: | 0.02 m³/h |
| Measuring dynamics: | 1:120 |
| Measuring range: | -20...80 °C -4...176 °F |
| -20...80 °C: | -4...176 °F |
| Display range: | -40...100 °C -40...212 °F |
| -40...100 °C: | -40...212 °F |
| Resolution: | 0.2 °C 0.5 °F |
| 0.2 °C: | 0.5 °F |
| Analogue start point: | -20...60 °C -4...140 °F |
| -20...60 °C: | -4...140 °F |
| Analogue end point: | 0...80 °C 32...176 °F |
| 0...80 °C: | 32...176 °F |
| In steps of: | 0.2 °C 0.5 °F |
| 0.2 °C: | 0.5 °F |
| Accuracy (in the measuring range): | ± (0,8 % MW + 0,5 % MEW) |
| Repeatability: | ± 0,2% MEW |
| Temperature drift: | ± 0,0333 °C / K; ± 0,0599 °F / K |
| Accuracy [K]: | ± 1 (25 °C; Q > 15 l/min) / ± 1 (77 °F; Q > 4 gpm) |
| Response time [s]: | 0.35; (dAP = 0) |
| Damping for the switching output dAP [s]: | 0...5 |
| Dynamic response T05 / T09 [s]: | T09 = 3 (Q > 15 l/min) / T09 = 3 (Q > 4 gpm) |
| Parameter setting options: | display can be deactivated; Display unit; empty pipe detection |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 FDIS |
| IO-Link device ID: | 532 d / 00 02 14 h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification |
| SIO mode: | no |
| Required master port type: | A |
| Process data analogue: | 3 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 5 |
| Ambient temperature: | -10...60 °C 14...140 °F |
| -10...60 °C: | 14...140 °F |
| Storage temperature: | -25...80 °C -13...176 °F |
| -25...80 °C: | -13...176 °F |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 60947-5-9 |
| Shock resistance: | DIN EN 60068-2-27 20 g (11 ms) |
| DIN EN 60068-2-27: | 20 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 5 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 5 g (10...2000 Hz) |
| MTTF [years]: | 78 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 2728 |
| Materials: | stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEI; FKM; PBT-GF20; TPE-U |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; FKM |
| Process connection: | threaded connection 2" NPT DN50 |
| Display: | Display unit 6 x LED, green (l/min, m³/h, gpm, gph, °C, °F) function display 1 x LED, yellow (10³) measured values alphanumeric display, 4-digit programming alphanumeric display, 4-digit |
| Display unit: | 6 x LED, green (l/min, m³/h, gpm, gph, °C, °F) |
| function display: | 1 x LED, yellow (10³) |
| measured values: | alphanumeric display, 4-digit |
| programming: | alphanumeric display, 4-digit |
| Display unit: | l/min; m³/h; gpm; gph; °C; °F |
| Accessories (supplied): | Label |
| Remarks: | MW = measured value MEW = Final value of the measuring range |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 2,73 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |