SA5004
Flow sensor. SAD10XDB50KG/US-100
Measurement of flow and temperature at the same time. Optimised for water, oils and air. Clearly visible 4-digit LED display. With two scalable analogue outputs. The process connection can be rotated for optimum alignment
Number of inputs and outputs: | Number of analogue outputs: 2 |
Process connection: | threaded connection M18 x 1,5 internal thread |
Special feature: | Gold-plated contacts |
Media: | water; glycol solutions; air; oils |
Note on media: | low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C) high-viscosity oils with viscosity: > 40 mm²/s (40 °C) |
Medium temperature [°C]: | -20...90 |
Pressure rating [bar]: | 100 |
MAWP (for applications according to CRN) [bar]: | 100 |
Operating voltage [V]: | 18...30 DC |
Current consumption [mA]: | < 100 |
Protection class: | III |
Reverse polarity protection: | yes |
Power-on delay time [s]: | 10 |
Number of inputs and outputs: | Number of analogue outputs: 2 |
Total number of outputs: | 2 |
Output signal: | analogue signal |
Number of analogue outputs: | 2 |
Analogue current output [mA]: | 4...20; (scalable) |
Max. load [Ω]: | 350 |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Probe length L [mm]: | 45 |
Operating mode: | relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended) |
Note on factory setting: | Operating mode: relative |
Setting range [m/s]: | 0.04...6 |
Greatest sensitivity [m/s]: | 0.04...3 |
Setting range [m/s]: | 0...200 |
Greatest sensitivity [m/s]: | 2...100 |
Measuring range [°C]: | -20...90 |
Resolution [°C]: | 0.2 |
Analogue start point [°C]: | -20...76 |
Analogue end point [°C]: | 4...100 |
In steps of [°C]: | 0.2 |
Temperature drift [cm/s x 1/K]: | 0,003 m/s x 1/K (< 20 °C; > 70 °C) |
Temperature gradient [K/min]: | 100 |
Accuracy: | ± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions :; water: 20...70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.) |
Repeatability: | 0,05 m/s; (water; flow velocity: 0,05...3 m/s) |
Temperature drift: | ± 0,005 K/°C |
Accuracy [K]: | ± 0,3 / ± 1; (water; flow velocity: 0,3...3 m/s / air; flow velocity: > 10 m/s) |
Response time [s]: | 0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09) |
Dynamic response T05 / T09 [s]: | 1,5 (T09); (water; flow velocity: 0,3...3 m/s) |
Parameter setting options: | medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour |
Ambient temperature [°C]: | -40...80 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 65; IP 67 |
EMC: | DIN EN 60947-5-9 |
Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
DIN EN 60068-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 180 |
UL approval: | UL Approval no. I004 File number UL E174189 |
UL Approval no.: | I004 |
File number UL: | E174189 |
Weight [g]: | 276 |
Materials: | stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30 |
Materials (wetted parts): | stainless steel (1.4404 / 316L); Gasket: FKM |
Process connection: | threaded connection M18 x 1,5 internal thread |
Display: | Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³) measured values alphanumeric display, red/green 4-digit |
Display unit: | 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³) |
measured values: | alphanumeric display, red/green 4-digit |
Remarks: | MW = measured value MEW = Final value of the measuring range |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12; Contacts: gold-plated |
ECCN: | |
Kraj pochodzenia: | DE |
EAN: | |
Waga: | 0,28 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |