ROP520
Incremental encoder with hollow shaft and display. INCREMENTAL ENCODER PERFORMANCE LINE
Resolution: | 1...10000; (parameterisable; Factory setting: 1024) resolution |
Communication interface: | IO-Link |
Shaft design: | hollow shaft open to one side |
Shaft diameter [mm]: | 12 |
Function principle: | incremental |
Detection system: | magnetic |
Application: | encoder; Speed monitor; counter |
Operating voltage [V]: | 4.75...30 DC |
Current consumption [mA]: | < 350 |
Protection class: | III |
Reverse polarity protection: | yes |
Max. revolution electrical [U/min]: | 12000 |
Electrical design: | HTL/TTL |
Switching frequency [kHz]: | 1000 |
Factory setting: | Output function: HTL (50 mA) |
Short-circuit protection: | yes |
Phase difference A and B [°]: | 90 |
Resolution: | 1...10000; (parameterisable; Factory setting: 1024) resolution |
Set point SP [U/min]: | -9994...9999 |
Set point SP [Hz]: | -166.6...166.7 |
Reset point rP [U/min]: | -9999...9994 |
Reset point rP [Hz]: | -166.7...166.6 |
Preset point: | 1...9999 |
Accuracy [°]: | 0.1 |
Parameter setting options: | encoder; Resolution; direction of rotation; HTL; TTL; Speed monitor; Resolution |
Communication interface: | IO-Link |
Transmission type: | COM2 (38,4 kBaud) |
IO-Link revision: | 1.1 |
SIO mode: | yes |
Min. process cycle time [ms]: | 2.3 |
Ambient temperature [°C]: | -40...85 |
Storage temperature [°C]: | -40...85 |
Max. relative air humidity [%]: | 95; (condensation not permissible) |
Protection: | IP 65; (on the housing: IP 67; on the shaft: IP 65) |
Shock resistance: | 100 g |
Vibration resistance: | 20 g |
MTTF [years]: | 218 |
Weight [g]: | 478.5 |
Dimensions [mm]: | Ø 58.5 / L = 69 |
Materials: | flange: aluminium; housing: stainless steel (1.4521 / 444); plug: stainless steel (1.4401 / 316); display window: PEI |
Max. revolution, mechanical [U/min]: | 12000 |
Max. starting torque [Nm]: | 2 |
Reference temperature torque [°C]: | 20 |
Shaft design: | hollow shaft open to one side |
Shaft diameter [mm]: | 12 |
Shaft material: | stainless steel |
Installation depth of shaft [mm]: | 27 |
Max. axial shaft misalignment [mm]: | 0,5 |
Display: | 10-segment display, red/green 4-digit parameterisable 2 x LED, yellow 5 x LED, green |
Accessories (supplied): | Stator coupling: 1 |
IO-Link: | Connector: 1 x M12, radial, can also be used axially; Moulded body: stainless steel (1.4401 / 316); Maximum cable length: 100 m; (IO-Link: max. 20 m) |
ECCN: | |
Kraj pochodzenia: | PL |
EAN: | |
Waga: | 0,48 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |