View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
PY7093
Poproś o ofertę
Ifm PY7093
Pressure sensor with display. PN-025-RER14-QFRKG/US/ /V
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Red/green display for clear identification of the acceptable range. The process connection can be rotated for optimum alignment. With long-term stability thanks to high overload protection. Robust design for use in harsh industrial environments, two switching outputs, one of which can be configured as an IO-Link output
Parametry techniczne
| Output signal: | switching signal; IO-Link; (configurable) |
| Measuring range: | 0...25 bar 0...363 psi 0...2.5 MPa |
| 0...25 bar: | 0...363 psi |
| Process connection: | threaded connection G 1/4 internal thread |
| Special feature: | Gold-plated contacts |
| Measuring element: | ceramic-capacitive pressure measuring cell |
| Application: | for industrial applications |
| Media: | liquids and gases |
| Conditionally suitable for: | For gaseous media the application is limited to max. 25 bar. |
| Medium temperature [°C]: | -25...80 |
| Min. bursting pressure: | 350 bar 5075 psi 35 MPa |
| 350 bar: | 5075 psi |
| Pressure rating: | 150 bar 2175 psi 15 Mpa |
| 150 bar: | 2175 psi |
| Vacuum resistance [mbar]: | -1000 |
| Type of pressure: | relative pressure |
| Operating voltage [V]: | 18...30 DC; (according to EN 50178 SELV/PELV) |
| Current consumption [mA]: | < 35 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | < 0.3 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 150; (200 (...60 °C) 250 (...40 °C)) |
| Switching frequency DC [Hz]: | < 170 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | 0...25 bar 0...363 psi 0...2.5 MPa |
| 0...25 bar: | 0...363 psi |
| Set point SP: | 0.2...25 bar 4...362 psi 0.02...2.5 MPa |
| 0.2...25 bar: | 4...362 psi |
| Reset point rP: | 0.1...24.9 bar 2...360 psi 0.01...2.49 MPa |
| 0.1...24.9 bar: | 2...360 psi |
| In steps of: | 0.1 bar 2 psi 0.01 MPa |
| 0.1 bar: | 2 psi |
| Switch point accuracy [% of the span]: | < ± 0,5 |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span]: | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span]: | < ± 0,25 |
| Long-term stability [% of the span]: | < ± 0,05; (per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K]: | 0,4; (-25...80 °C) |
| Temperature coefficient span [% of the span / 10 K]: | 0,4; (-25...80 °C) |
| Response time [ms]: | < 3 |
| Delay time programmable dS, dr [s]: | 0...50 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 402 d / 00 01 92 h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 2.3 |
| Ambient temperature [°C]: | -25...80 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 65; IP 67 |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
| DIN EN 60068-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 254 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 234.5 |
| Materials: | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); ceramics; FKM |
| Min. pressure cycles: | 100 million |
| Tightening torque [Nm]: | 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
| Process connection: | threaded connection G 1/4 internal thread |
| Switching cycles mechanical: | 100 million |
| Restrictor element integrated: | no (can be retrofitted) |
| Display: | Display unit 3 x LED, green (bar, psi, MPa) switching status 2 x LED, yellow measured values alphanumeric display, red/green 4-digit |
| Display unit: | 3 x LED, green (bar, psi, MPa) |
| switching status: | 2 x LED, yellow |
| measured values: | alphanumeric display, red/green 4-digit |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
| Parameter: | Factory setting |
| SP1: | 0.04 MPa |
| rP1: | 0.03 MPa |
| ou1: | Hnc |
| SP2: | 0.35 MPa |
| rP2: | 0.30 MPa |
| ou2: | Hno |
| ds1/ds2: | 0 ms |
| dr1/dr2: | 0 ms |
| coF: | 0 % |
| P-n: | pnp |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,23 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |