View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
PV7000
Poproś o ofertę
Ifm PV7000
Pressure switch with IO-Link. PV-400-SEG14-UFRVG/US/ /
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Compact housing for use where space is restricted. Very high overpressure and vacuum resistance. Robust stainless steel housing with high shock and vibration resistance. Lifespan of more than 60 million pressure cycles. Two programmable switching outputs, one of them with IO-Link communication interface
Parametry techniczne
| Output signal: | switching signal; IO-Link; (configurable) |
| Measuring range: | 0...400 bar 0...5800 psi 0...40 MPa |
| 0...400 bar: | 0...5800 psi |
| Process connection: | threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
| Measuring element: | metallic thin film cell |
| Application: | for industrial applications |
| Media: | liquids and gases |
| Medium temperature [°C]: | -40...90 |
| Min. bursting pressure: | 1700 bar 24655 psi 170 MPa |
| 1700 bar: | 24655 psi |
| Pressure rating: | 1000 bar 14500 psi 100 Mpa |
| 1000 bar: | 14500 psi |
| Note on pressure rating: | static |
| Vacuum resistance [mbar]: | -1000 |
| Type of pressure: | relative pressure |
| Operating voltage [V]: | 18...30 DC |
| Current consumption [mA]: | < 15 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | < 0.3 |
| Number of inputs and outputs: | Number of digital outputs: 2 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 100 |
| Switching frequency DC [Hz]: | < 170 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | 0...400 bar 0...5800 psi 0...40 MPa |
| 0...400 bar: | 0...5800 psi |
| Set point SP: | 4...400 bar 58...5802 psi 0.4...40 MPa |
| 4...400 bar: | 58...5802 psi |
| Reset point rP: | 2...398 bar 30...5773 psi 0.2...39.8 MPa |
| 2...398 bar: | 30...5773 psi |
| In steps of: | 0.2 bar 1 psi 0.02 MPa |
| 0.2 bar: | 1 psi |
| Factory setting: | SP1 = 100 bar rP1 = 92 bar ou1 = Hno; SP2 = 300 bar rP2 = 292 bar ou2 = Hno; dS1/dS2 = 0 ms dr1/dr2 = 0 ms coF = 0 % P-n = PnP dAP= 60 ms |
| SP1 = 100 bar: | rP1 = 92 bar |
| SP2 = 300 bar: | rP2 = 292 bar |
| dS1/dS2 = 0 ms: | dr1/dr2 = 0 ms |
| coF = 0 %: | P-n = PnP |
| Switch point accuracy [% of the span]: | < ± 0,5 (nach DIN EN 61298-2) |
| Repeatability [% of the span]: | < ± 0,05; (with temperature fluctuations < 10 K) |
| Characteristics deviation [% of the span]: | < ± 0,5 (nach DIN EN 61298-2); (incl. drift when overtightened, zero point and span error, non-linearity, hysteresis) |
| Linearity deviation [% of the span]: | < ± 0,1 (BFSL) / < ± 0,2 (LS) |
| Hysteresis deviation [% of the span]: | < ± 0,2 |
| Long-term stability [% of the span]: | < ± 0,1; (per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K]: | < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
| Temperature coefficient span [% of the span / 10 K]: | < 0,1 (-25...90 °C) / < 0,2 (-40...-25 °C) |
| Response time [ms]: | < 3 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| IO-Link device ID: | 708 d / 00 02 c4 h |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 2 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 5 |
| Ambient temperature [°C]: | -40...90 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 67; IP 69K |
| EMC: | DIN EN 61326-1 |
| Shock resistance: | DIN EN 60068-2-27 500 g (1 ms) |
| DIN EN 60068-2-27: | 500 g (1 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 667.77 |
| UL approval: | UL Approval no. J016 |
| UL Approval no.: | J016 |
| Pressure Equipment Directive: | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight [g]: | 63.5 |
| Materials: | 1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PEI |
| Materials (wetted parts): | stainless steel (1.4305 / 303); 1.4542 (17-4 PH / 630) |
| Min. pressure cycles: | 60 million; (at 1.2 times nominal pressure) |
| Tightening torque [Nm]: | 25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
| Process connection: | threaded connection G 1/4 external thread (DIN EN ISO 1179-2); internal thread:M5 |
| Process connection sealing: | FKM (to DIN 3869) |
| Restrictor element integrated: | yes |
| Remarks: | BFSL = Best Fit Straight Line LS = limit value setting |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,06 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |