PI2717
Flush pressure sensor with display. PI-1,6-REA01-MFRKG/US/ /P
Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
Measuring range: | -0.1...1.6 bar -100...1600 mbar -1.46...23.2 psi -10...160 kPa |
-0.1...1.6 bar: | -100...1600 mbar |
Process connection: | threaded connection G 1 external thread Aseptoflex Vario |
Special feature: | Gold-plated contacts |
Application: | food and beverage industry |
Media: | viscous media and liquids with suspended particles; liquids and gases |
Medium temperature [°C]: | -25...125; (145 max. 1h) |
Min. bursting pressure: | 40000 mbar 580 psi 4000 kPa |
40000 mbar: | 580 psi |
Pressure rating: | 15000 mbar 215 psi 1500 kPa |
15000 mbar: | 215 psi |
Vacuum resistance [mbar]: | -1000 |
Type of pressure: | relative pressure |
No dead space: | yes |
MAWP (for applications according to CRN) [bar]: | 15 |
Min. insulation resistance [MΩ]: | 100; (500 V DC) |
Protection class: | III |
Reverse polarity protection: | yes |
Integrated watchdog: | yes |
Operating voltage [V]: | 20...32 DC |
Current consumption [mA]: | 3.6...21 |
Power-on delay time [s]: | 1 |
Operating voltage [V]: | 18...32 DC |
Current consumption [mA]: | < 45 |
Power-on delay time [s]: | 0.5 |
Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
Total number of outputs: | 2 |
Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
Electrical design: | PNP/NPN |
Number of digital outputs: | 2 |
Output function: | normally open / normally closed; (parameterisable) |
Number of analogue outputs: | 1 |
Analogue current output [mA]: | 4...20, invertible; (scalable) |
Short-circuit protection: | yes |
Type of short-circuit protection: | pulsed |
Overload protection: | yes |
Max. load [Ω]: | 300 |
Max. voltage drop switching output DC [V]: | 2 |
Permanent current rating of switching output DC [mA]: | 250 |
Switching frequency DC [Hz]: | 125 |
Max. load [Ω]: | (Ub - 10 V) / 20 mA |
Measuring range: | -0.1...1.6 bar -100...1600 mbar -1.46...23.2 psi -10...160 kPa |
-0.1...1.6 bar: | -100...1600 mbar |
Set point SP: | -96...1600 mbar -1.4...23.2 psi -9.6...160 kPa |
-96...1600 mbar: | -1.4...23.2 psi |
Reset point rP: | -100...1598 mbar -1.44...23.16 psi -10...159.8 kPa |
-100...1598 mbar: | -1.44...23.16 psi |
Analogue start point: | -100...1200 mbar -1.46...17.42 psi -10...120 kPa |
-100...1200 mbar: | -1.46...17.42 psi |
Analogue end point: | 300...1600 mbar 4.34...23.2 psi 30...160 kPa |
300...1600 mbar: | 4.34...23.2 psi |
In steps of: | 2 mbar 0.02 psi 0.2 kPa |
2 mbar: | 0.02 psi |
Factory setting: | SP1 = 0.4 bar rP1 = 0.368 bar SP2 = 1.2 bar rP2 = 1.168 bar ASP = 0.0 bar AEP = 1.6 bar |
Switch point accuracy [% of the span]: | < ± 0,2; (Turn down 1:1) |
Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
Characteristics deviation [% of the span]: | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
Linearity deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Hysteresis deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,05; (0...70 °C) |
Temperature coefficient span [% of the span / 10 K]: | < ± 0,15; (0...70 °C) |
Damping for the switching output dAP [s]: | 0...30 |
Damping for the analogue output dAA [s]: | 0.01...99.99 |
Step response time analogue output [ms]: | 45 |
Min. response time of switching output (dAP) [ms]: | 3 |
Step response time analogue output [ms]: | 7 |
Communication interface: | IO-Link |
Transmission type: | COM2 (38,4 kBaud) |
IO-Link revision: | 1.0 |
IO-Link device ID: | 727 d / 00 02 d7 h |
Profiles: | no profile |
SIO mode: | yes |
Required master port type: | A |
Process data analogue: | 1 |
Process data binary: | 2 |
Min. process cycle time [ms]: | 2.3 |
Ambient temperature [°C]: | -25...80 |
Storage temperature [°C]: | -40...100 |
Protection: | IP 67; IP 68; IP 69K |
EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-5 Surge 0,5/1 kV EN 61000-4-6 HF conducted 10 V |
EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
EN 61000-4-3 HF radiated: | 10 V/m |
EN 61000-4-4 Burst: | 2 kV |
EN 61000-4-5 Surge: | 0,5/1 kV |
EN 61000-4-6 HF conducted: | 10 V |
Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
DIN IEC 68-2-27: | 50 g (11 ms) |
Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
MTTF [years]: | 154 |
Note on approval: | factory certificate available as download at www.factory-certificate.ifm |
Weight [g]: | 360 |
Materials: | stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA |
Materials (wetted parts): | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE |
Min. pressure cycles: | 100 million |
Process connection: | threaded connection G 1 external thread Aseptoflex Vario |
Display: | Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
Display unit: | LED, green |
switching status: | LED, yellow |
function display: | alphanumeric display, 4-digit |
measured values: | alphanumeric display, 4-digit |
Display unit: | mbar; kPa; psi; inH2O; mWS; % of the span |
Pack quantity: | 1 pcs. |
Connection: | Connector: 1 x M12; Contacts: gold-plated |
ECCN: | |
Kraj pochodzenia: | DE |
EAN: | |
Waga: | 0,36 kg |
Długość: | 0,00 m |
Szerokość: | 0,00 m |
Wysokość: | 0,00 m |