View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
PI2309
Poproś o ofertę
Ifm PI2309
Flush pressure sensor with display. PI-1-1BREZ02-MFRKG/US/ /P
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
For use in high temperatures in the food and beverage industry. Robust stainless steel housing with hygienic front-flush design. Can be connected as two-wire or three-wire. Reduced wiring complexity when operated as two-wire current loop. Integrated clamp diaphragm seal with stainless steel membrane
Parametry techniczne
| Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
| Measuring range: | -1000...1000 mbar -14.5...14.5 psi -100...100 kPa |
| -1000...1000 mbar: | -14.5...14.5 psi |
| Process connection: | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Special feature: | Gold-plated contacts |
| Application: | food and beverage industry |
| Media: | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C]: | -25...200 |
| Min. bursting pressure: | 30000 mbar 435 psi 3000 kPa |
| 30000 mbar: | 435 psi |
| Pressure rating: | 10000 mbar 145 psi 1000 kPa |
| 10000 mbar: | 145 psi |
| Type of pressure: | relative pressure; vacuum |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Integrated watchdog: | yes |
| Operating voltage [V]: | 20...32 DC |
| Current consumption [mA]: | 3.6...21 |
| Power-on delay time [s]: | 1 |
| Operating voltage [V]: | 18...32 DC |
| Current consumption [mA]: | < 45 |
| Power-on delay time [s]: | 0.5 |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20, invertible; (scalable) |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Max. load [Ω]: | 300 |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250 |
| Switching frequency DC [Hz]: | 125 |
| Max. load [Ω]: | (Ub - 10 V) / 20 mA |
| Measuring range: | -1000...1000 mbar -14.5...14.5 psi -100...100 kPa |
| -1000...1000 mbar: | -14.5...14.5 psi |
| Set point SP: | -998...1000 mbar -14.45...14.5 psi -99.8...100 kPa |
| -998...1000 mbar: | -14.45...14.5 psi |
| Reset point rP: | -1000...998 mbar -14.5...14.45 psi -100...99.8 kPa |
| -1000...998 mbar: | -14.5...14.45 psi |
| Analogue start point: | -1000...500 mbar -14.5...7.25 psi -100...50 kPa |
| -1000...500 mbar: | -14.5...7.25 psi |
| Analogue end point: | -500...1000 mbar -7.25...14.5 psi -50...100 kPa |
| -500...1000 mbar: | -7.25...14.5 psi |
| In steps of: | 1 mbar 0.05 psi 0.1 kPa |
| 1 mbar: | 0.05 psi |
| Factory setting: | SP1 = -500 mbar rP1 = -540 mbar SP2 = 500 mbar rP2 = 460 mbar ASP = -1000 mbar AEP = 1000 mbar |
| Switch point accuracy [% of the span]: | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span]: | < ± 0,2; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
| Linearity deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span]: | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,3; (0...200 °C) |
| Temperature coefficient span [% of the span / 10 K]: | < ± 0,15; (0...200 °C) |
| Damping for the switching output dAP [s]: | 0...30 |
| Damping for the analogue output dAA [s]: | 0.01...99.99 |
| Step response time analogue output [ms]: | 45 |
| Min. response time of switching output (dAP) [ms]: | 3 |
| Step response time analogue output [ms]: | 7 |
| Communication interface: | IO-Link |
| Transmission type: | COM2 (38,4 kBaud) |
| IO-Link revision: | 1.0 |
| SDCI standard: | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
| IO-Link device ID: | 108 d / 00 00 6C h |
| Profiles: | no profile |
| SIO mode: | yes |
| Required master port type: | A |
| Process data analogue: | 1 |
| Process data binary: | 2 |
| Min. process cycle time [ms]: | 2.3 |
| Ambient temperature [°C]: | -25...80 |
| Note on ambient temperature: | Medium temperature: ≤ 160 °C |
| Ambient temperature [°C]: | -25...65 |
| Note on ambient temperature: | Medium temperature: ≤ 200 °C |
| Storage temperature [°C]: | -25...100 |
| Protection: | IP 67; IP 68; IP 69K |
| EMC: | DIN EN 61000-6-2 DIN EN 61000-6-3 |
| Shock resistance: | DIN EN 60068-2-27 50 g (11 ms) |
| DIN EN 60068-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN EN 60068-2-6 20 g (10...2000 Hz) |
| DIN EN 60068-2-6: | 20 g (10...2000 Hz) |
| MTTF [years]: | 141 |
| Note on approval: | Including free 6-point calibration certificate. |
| Weight [g]: | 1047.5 |
| Materials: | stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA |
| Materials (wetted parts): | stainless steel (1.4435 / 316L) |
| Min. pressure cycles: | 10 million |
| Process connection: | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Surface characteristics Ra/Rz of the wetted parts: | < 0.38 / - |
| Fill fluid for pressure transfer: | NEOBEE (food grade, FDA compliant) |
| Diaphragm diameter [mm]: | 47.5 |
| Display: | Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit |
| Display unit: | LED, green |
| switching status: | LED, yellow |
| function display: | alphanumeric display, 4-digit |
| measured values: | alphanumeric display, 4-digit |
| Display unit: | mbar; kPa; psi; inH2O; mWS; % of the span |
| Pack quantity: | 1 pcs. |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 1,05 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |