View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
PH0104
PH-010-RES30-KFPKG/US/ /P
Poproś o ofertę
Ifm PH0104
PH-010-RES30-KFPKG/US/ /P
Flush pressure sensor. PH-010-RES30-KFPKG/US/ /P
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
Combined level measurement and point level detection with analogue / switching output. Resistant to high-pressure cleaning with aggressive cleaning agents. With long-term stability thanks to high repeatability and low linearity error. Hygienic design for the requirements of the food and beverage industry. Flush mount installation in containers, tanks and pipes
Parametry techniczne
| Output signal: | switching signal; analogue signal; (configurable) |
| Measuring range: | -0.5...10 bar -7...145 psi -50...1000 kPa |
| -0.5...10 bar: | -7...145 psi |
| Process connection: | 1,5" |
| Special feature: | Gold-plated contacts |
| Application: | food and beverage industry |
| Installation: | freely rotatable housing 350° |
| Media: | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C]: | -25...80 |
| Min. bursting pressure: | 150 bar 2175 psi 15000 kPa |
| 150 bar: | 2175 psi |
| Pressure rating: | 50 bar 725 psi 5000 kPa |
| 50 bar: | 725 psi |
| Type of pressure: | relative pressure |
| No dead space: | yes |
| Operating voltage [V]: | 20...30 DC |
| Current consumption [mA]: | < 60 |
| Min. insulation resistance [MΩ]: | 100; (500 V DC) |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Power-on delay time [s]: | 0.2 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs: | 2 |
| Output signal: | switching signal; analogue signal; (configurable) |
| Electrical design: | PNP/NPN |
| Number of digital outputs: | 2 |
| Output function: | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V]: | 2 |
| Permanent current rating of switching output DC [mA]: | 250 |
| Switching frequency DC [Hz]: | < 170 |
| Number of analogue outputs: | 1 |
| Analogue current output [mA]: | 4...20; (scalable 1:4) |
| Max. load [Ω]: | (Ub - 10 V) / 20 mA |
| Analogue voltage output [V]: | 0...10; (scalable 1:4) |
| Min. load resistance [Ω]: | 2000 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring range: | -0.5...10 bar -7...145 psi -50...1000 kPa |
| -0.5...10 bar: | -7...145 psi |
| Set point SP: | -0.45...9.99 bar -7...145 psi -45...999 kPa |
| -0.45...9.99 bar: | -7...145 psi |
| Reset point rP: | -0.5...9.94 bar -7...144 psi -50...994 kPa |
| -0.5...9.94 bar: | -7...144 psi |
| Analogue start point: | -0.5...7.49 bar -7...109 psi -50...749 kPa |
| -0.5...7.49 bar: | -7...109 psi |
| Analogue end point: | 2...9.99 bar 29...145 psi 200...999 kPa |
| 2...9.99 bar: | 29...145 psi |
| In steps of: | 0.01 bar 1 psi 1 kPa |
| 0.01 bar: | 1 psi |
| Repeatability [% of the span]: | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span]: | < ± 0,6; (Turn down 1:1 linearity, incl. hysteresis and repeatability limit value setting to DIN 16086) |
| Linearity deviation [% of the span]: | < ± 0,5; (Turn down 1:1) |
| Hysteresis deviation [% of the span]: | < ± 0,1; (Turn down 1:1) |
| Long-term stability [% of the span]: | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K]: | < ± 0,1; (0...80 °C) |
| Temperature coefficient span [% of the span / 10 K]: | < ± 0,2; (0...80 °C) |
| Response time [ms]: | < 3 |
| Damping for the switching output dAP [s]: | 0...4 |
| Damping for the analogue output dAA in steps [s]: | 0 - 0,1 - 0,5 - 2 |
| Max. response time analogue output [ms]: | 3 |
| Parameter setting options: | hysteresis / window; normally open / normally closed; switching logic; current/voltage output; Damping; adaptation of displayed values; display can be rotated and switched off; Display unit; zero point; span |
| Ambient temperature [°C]: | -25...80 |
| Storage temperature [°C]: | -40...100 |
| Protection: | IP 67 |
| EMC: | EN 61000-4-2 ESD 4 kV CD / 8 kV AD EN 61000-4-3 HF radiated 10 V/m EN 61000-4-4 Burst 2 kV EN 61000-4-6 HF conducted 10 V |
| EN 61000-4-2 ESD: | 4 kV CD / 8 kV AD |
| EN 61000-4-3 HF radiated: | 10 V/m |
| EN 61000-4-4 Burst: | 2 kV |
| EN 61000-4-6 HF conducted: | 10 V |
| Shock resistance: | DIN IEC 68-2-27 50 g (11 ms) |
| DIN IEC 68-2-27: | 50 g (11 ms) |
| Vibration resistance: | DIN IEC 68-2-6 20 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 20 g (10...2000 Hz) |
| Weight [g]: | 341.5 |
| Materials: | stainless steel (1.4404 / 316L); PBT; PC; PEI; EPDM/X; FKM |
| Materials (wetted parts): | stainless steel (1.4404 / 316L); ceramics (99.9 % Al2O3); PTFE |
| Min. pressure cycles: | 100 million |
| Process connection: | 1,5" |
| Display: | switching status 2 x LED, red function display 7-segment LED display measured values 7-segment LED display |
| switching status: | 2 x LED, red |
| function display: | 7-segment LED display |
| measured values: | 7-segment LED display |
| Display unit: | bar; psi; kPa |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12; Contacts: gold-plated |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DEUTSCHLAND |
| EAN: | |
| Waga: | 0,36 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |