View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
OPD100
Poproś o ofertę
Ifm OPD100
Contour sensor. OPDLFPKG
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
PMD Profiler for object profile checking. Inline quality control checks to ensure correct assembly of parts. Quick set-up without software. Distance-independent measurement for high tolerance on object positioning. Immunity to extraneous light – no screening or external illumination required. Optional contour visualisation via software to simplify the failure analysis
Parametry techniczne
| Type of light: | red light |
| Communication interface: | IO-Link |
| Laser protection class: | 1 |
| Dimensions [mm]: | 88 x 65 x 28.5 |
| Operating voltage [V]: | 10...30 DC |
| Current consumption [mA]: | < 200 |
| Current consumption reference voltage [V]: | 10 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 650 |
| Number of inputs and outputs: | Number of digital inputs: 1; Number of digital outputs: 2 |
| Number of digital inputs: | 1 |
| Trigger: | external |
| Electrical design: | PNP/NPN; (parameterisable) |
| Number of digital outputs: | 2 |
| Output function: | 2 x normally open / normally closed; (parameterisable) |
| Max. current load per output [mA]: | 100 |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Measuring distance (Z-direction) [mm]: | 150...300 |
| Width of the measuring range (X-direction) at min. measuring distance [mm]: | 45; (distance = 150mm) |
| Width of the measuring range (X-direction) at max. measuring distance [mm]: | 90; (distance = 300mm) |
| Sampling rate [Hz]: | 5 |
| Measured value resolution: | Z-direction 200 µm X-direction 250 µm |
| Accuracy: | Z-direction ± 500 µm X-direction ± 500 µm background (white 90 % remission) |
| Communication interface: | IO-Link |
| Transmission type: | COM3 (230,4 kBaud) |
| IO-Link revision: | 1.1 |
| SDCI standard: | IEC 61131-9 |
| Profiles: | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode: | yes |
| Required master port type: | A |
| Min. process cycle time [ms]: | 2.3 |
| IO-Link process data (cyclical): | function bit length process value 16 device status 4 binary switching information 1 |
| function: | bit length |
| process value: | 16 |
| device status: | 4 |
| binary switching information: | 1 |
| IO-Link functions (acyclical): | operating hours counter; number of trigger events; ROI setting |
| Supported DeviceIDs: | 1260d / 04 ECh |
| Note: | For further information please see the IODD PDF file under "Downloads" |
| Ambient temperature [°C]: | -10...55 |
| Storage temperature [°C]: | -40...60 |
| Protection: | IP 65 |
| Max. immunity to extraneous light [klx]: | 20 |
| EMC: | EN 60947-5-2 |
| Laser protection class: | 1 |
| Notes on laser protection: | Caution: laser light laser class: 1 EN / IEC60825-1:2007 EN / IEC60825-1:2014 Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
| Caution:: | laser light |
| laser class:: | 1 |
| Weight [K40]: | 484.9 |
| Dimensions [mm]: | 88 x 65 x 28.5 |
| Materials: | Housing: diecast zinc ; PPSU; ABS; PMMA; PBT / PC; EPDM; front lens: PMMA |
| Display: | switching status 1 x LED, yellow Display operation 1 x LED, green colour display |
| switching status: | 1 x LED, yellow |
| Display operation: | 1 x LED, green |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M12 |
| measuring distance (Z-direction): | light line |
| 150 mm: | 50 x 1 mm |
| 300 mm: | 100 x 1 mm |
| Extraneous light on the object: | < 20 klx |
| constant ambient conditions: | 23 °C / 960 hPa |
| minimum power-on time in minutes: | 10 |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,48 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |