OJ5032
Through-beam sensor receiver. OJE-FNKG/SO/AS
Particularly compact housing for use where space is restricted. Very long range. Intuitive setting of sensitivity and output function. Easy mounting by clipping onto a mounting base. LED display to check operation, switching status and function
| Type of light: | red light |
| Housing: | rectangular |
| Dimensions [mm]: | 35 x 11 x 24 |
| Function principle: | Through-beam sensor |
| Operating voltage [V]: | 10...30 DC |
| Current consumption [mA]: | < 12 |
| Protection class: | III |
| Reverse polarity protection: | yes |
| Type of light: | red light |
| Wave length [nm]: | 660 |
| Electrical design: | NPN |
| Output function: | light-on/dark-on mode; (programmable) |
| Max. voltage drop switching output DC [V]: | 2.5 |
| Permanent current rating of switching output DC [mA]: | 200 |
| Switching frequency DC [Hz]: | 1200 |
| Short-circuit protection: | yes |
| Type of short-circuit protection: | pulsed |
| Overload protection: | yes |
| Transmitter / receiver: | receiver |
| Range [m]: | < 10 |
| Range adjustable: | yes |
| Ambient temperature [°C]: | -25...60 |
| Protection: | IP 67 |
| EMC: | EN 60947-5-2 |
| MTTF [years]: | 1058 |
| Weight [g]: | 39.4 |
| Housing: | rectangular |
| Dimensions [mm]: | 35 x 11 x 24 |
| Materials: | housing: ABS; fixture: diecast zinc; LED window: SEPS; pushbutton: SEPS |
| Lens material: | glass |
| Lens alignment: | side lens |
| Display: | switching status 1 x LED, yellow operation 1 x LED, green function 1 x LED, red |
| switching status: | 1 x LED, yellow |
| operation: | 1 x LED, green |
| function: | 1 x LED, red |
| Electronic lock: | yes |
| Accessories (supplied): | Basic clip: 1, E20964 screws: 2 x M3 x 16 spring washers: 2 Nuts: 2 |
| Remarks: | operating voltage "supply class 2" according to cULus |
| Pack quantity: | 1 pcs. |
| Connection: | Connector: 1 x M8 |
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,04 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |