View this page in: English
Email: "ucnguBrctvdgcxgt0eqo"
Wybierz język
1-Click Zapytanie
Produkt
Ifm
DN4013
Poproś o ofertę
Ifm DN4013
Switched-mode power supply 24 V DC. PSU-1AC/24VDC-10A
Na prośbę. Prześlij nam wiadomość e-mail z zapytaniem o cenę i dostępność.
"ucnguBrctvdgcxgt0eqo"
Opis
For the regulated power supply for controllers, sensors, actuators, and industrial electronics. Low power loss thanks to high efficiency. High mains buffering time. Particularly space-saving design. High power reserves
Parametry techniczne
| Frequency AC [Hz]: | 47...64 |
| Operating voltage tolerance [%]: | 10 |
| Operating voltage tolerance 2 [%]: | 10 |
| Operating voltage [V]: | automatic range selection |
| Nominal voltage AC [V]: | < 230 |
| Nominal frequency AC [Hz]: | 50...60 |
| Input voltage range AC [V]: | 100...120 / 200...240 |
| Output voltage DC [V]: | 24...28 |
| Protection class: | I; (IEC 61140) |
| Overvoltage protection: | yes; (< 39 DC) |
| Output voltage [V]: | adjustable; output voltage to SELV, PELV |
| Max. output current at min. output voltage [A]: | 10 |
| Max. output current at max. output voltage [A]: | 8.6 |
| Max. output current peak at min. output voltage [A]: | 12 |
| Max. output current peak at max. output voltage [A]: | 10.3 |
| Output power (permanent) [W]: | 240 |
| Output power (peak) [W]: | 288 |
| Note on output power (peak): | ≤ 45 °C permitted continuously; > 45 °C < 1 minute every 10 minutes |
| Power factor (nominal voltage 120 V AC / 60 Hz): | 0.59 |
| Power factor (nominal voltage 230 V AC / 50 Hz): | 0.51 |
| Power reserve [%]: | 20 |
| Number of output circuits: | 1 |
| Max. residual ripple [mV]: | 50 |
| Switch-on peak current (nominal voltage 120 V AC / 60 Hz) [A]: | 3 |
| Switch-on peak current (nominal voltage 230 V AC / 50 Hz) [A]: | 3 |
| Inrush current limitation: | yes |
| Efficiency (nominal voltage 120 V AC / 60 Hz) [%]: | 91 |
| Efficiency (nominal voltage 230 V AC / 50 Hz) [%]: | 91.6 |
| External input protection: | ≤ B-10 A / ≤ C-6 A |
| Derating [W/K]: | 6 (60...70 °C) |
| Mains buffering time (nominal voltage 120 V AC / 60 Hz) [ms]: | 46 |
| Mains buffering time (nominal voltage 230 V AC / 50 Hz) [ms]: | 47 |
| Input current (nominal voltage 120 V AC / 60 Hz) [A]: | 3.73 |
| Input current (nominal voltage 230 V AC / 50 Hz) [A]: | 2.23 |
| Power loss (nominal voltage 120 V AC / 60 Hz) [W]: | 23.7 |
| Power loss (nominal voltage 230 V AC / 50 Hz) [W]: | 22 |
| Back feeding protection [V]: | 35 |
| Short-circuit proof: | yes |
| Overload protection: | yes |
| Overload performance: | output current constant |
| Type DC-OK signal: | relay output |
| Reliability of the DC OK signal: | 60 V DC (0.3 A) / 30 V DC (1 A) / 30 V AC (0.5 A) |
| Ambient temperature [°C]: | -25...70 |
| Note on ambient temperature: | observe the free space for convection (see operating instructions) |
| Storage temperature [°C]: | -40...85 |
| Max. relative air humidity [%]: | 95; (IEC 60068-2-30) |
| Protection: | IP 20; (EN 60529) |
| Degree of soiling: | 2; (IEC 62103: conductive soiling not permitted) |
| Overheat protection: | yes |
| EMC: | EN 61000-6-1 EN 61000-6-2 EN 61000-6-4 |
| Vibration resistance: | IEC 60068-2-6 ±1,6 mm 2...17,8 Hz / 2 g 17,8...500 Hz |
| IEC 60068-2-6: | ±1,6 mm 2...17,8 Hz / 2 g 17,8...500 Hz |
| Shock resistance: | IEC 60068-2-27 30 g 6 ms / 20 g 11 ms |
| IEC 60068-2-27: | 30 g 6 ms / 20 g 11 ms |
| Weight [K40]: | 875.5 |
| Type of mounting: | rail; (TH35 (EN 60715)) |
| Dimensions [mm]: | 124 x 62 x 122.5 |
| Materials: | steel sheet |
| Display: | DC ok 1 x LED |
| DC ok: | 1 x LED |
| Remarks: | Series connection of outputs only applies to identical units up to max. 150 V DC overall voltage |
| Pack quantity: | 1 pcs. |
| Connection: | screw terminals: |
Parametry logistyczne
| ECCN: | |
| Kraj pochodzenia: | CN |
| EAN: | |
| Waga: | 0,88 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |