AC2726
AS-Interface PCB module. Circuit board
For installation in small housings, control cabinets and operator panels. Simple and fast wiring by means of screw terminals. Particularly space-saving design. For integration of mechanical switches into AS-i networks. AS-i connection for four control and signalling devices
| Operating voltage [V]: | 26.5...31.6 DC |
| Current consumption [mA]: | < 200 |
| Max. current load total [A]: | 0.18 |
| Integrated watchdog: | yes |
| Number of inputs and outputs: | Number of digital inputs: 4; Number of digital outputs: 4 |
| Number of digital inputs: | 4 |
| Sensor supply of the inputs: | AS-i |
| Voltage supply [V]: | 20...30 |
| Input current High [mA]: | > 1.5 |
| Input current Low [mA]: | < 5 |
| Digital inputs protected against short circuits: | yes |
| Number of digital outputs: | 4 |
| Voltage range DC [V]: | AS-i |
| Max. current load per output [mA]: | 100; (note current load for all inputs and outputs ) |
| Short-circuit proof: | yes |
| Ambient temperature [°C]: | -25...70 |
| Protection: | IP 00 |
| EMC: | EN 50295 |
| MTTF [years]: | 280 |
| AS-i version: | 2.1 |
| Extended addressing mode possible: | no |
| AS-i profile: | S-7.0.F |
| AS-i I/O configuration [hex]: | 7 |
| AS-i ID code [hex]: | 0.F |
| AS-i certificate pending: | yes |
| Assignment of the data bits: | data bit D0 D1 D2 D3 input I-1 I-2 I-3 I-4 Output O-1 O-2 O-3 O-4 |
| data bit: | D0 |
| input: | I-1 |
| Output: | O-1 |
| Assignment of the parameter bits: | parameter bit function P0 not used P1 not used P2 not used P3 not used |
| parameter bit: | function |
| P0: | not used |
| P1: | not used |
| P2: | not used |
| P3: | not used |
| Weight [g]: | 34 |
| Remarks: | The AS-i module is a PCB solution for an AS-i slave, supply via AS-i. A watchdog function switches the outputs off if there is no communication on the AS-i line. |
| Pack quantity: | 1 pcs. |
| ECCN: | |
| Kraj pochodzenia: | DE |
| EAN: | |
| Waga: | 0,03 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |