EL6022
EL6022 | 2-channel serial interface RS422/RS485, D-sub connection
The EL6022 serial interface enables the connection of devices with two RS422/RS485 interfaces. The devices connected to the EL6022 EtherCAT Terminal communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300 baud up to 115.2 kbaud. The RS422/RS485 interfaces guarantee high interference immunity through electrically isolated signals. The EL6022 can provide 2 x 5 V/20 mA out of the E-bus supply (electrically isolated, short-circuit-proof) for the supply of external devices.
| Technology: | D-sub, 9-pin |
| Data transfer channels: | 2 |
| Data transfer rates: | 300…115,200 baud; default: 9600 baud, 8 data bits, no parity and one stop bit |
| Interfaces: | 2 x RS422/RS485 |
| Line impedance: | 120 Ω |
| Cable length: | approx. 1000 m twisted pair |
| Providing external supply: | 2 x max. 5 V/20 mA, out of E-Bus supply, short-circuit-proof |
| Power supply: | via the E-bus |
| Distributed clocks: | – |
| Electrical isolation: | 500 V (E-bus/signal voltage) |
| Data buffer: | 864 bytes receive buffer, 128 bytes transmit buffer |
| Bit width in the process image: | 22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status |
| Configuration: | no address setting, configuration via the controller |
| Current consumption power contacts: | – |
| Current consumption E-bus: | typ. 270 mA |
| Special features: | 2 x 5 V/20 mA for external supply |
| Weight: | approx. 55 g |
| Operating/storage temperature: | -25…+60 °C/-40…+85 °C |
| Relative humidity: | 95 %, no condensation |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/variable |
| Approvals: | CE, UL, Ex |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |