EK9500
EK9500 | EtherNet/IP Bus Coupler
The EK9500 Bus Coupler connects EtherNet/IP networks to the EtherCAT Terminals (ELxxxx) as well as EtherCAT Box modules (EPxxxx) and converts the telegrams from EtherNet/IP to the E-bus signal representation. One station consists of an EK9500 and any number of EtherCAT Terminals. The coupler is connected to EtherNet/IP via RJ45. In EtherCAT, the EtherNet/IP coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a large selection of terminals. The coupler supports the EtherNet/IP profile and fits seamlessly into EtherNet/IP networks.
| Task within EtherCAT system: | coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to EtherNet/IP networks |
| Number of EtherCAT Terminals: | depending on the process data size |
| Type/number of peripheral signals: | depending on the process data size |
| Protocol: | EtherNet/IP |
| Data transfer rates: | 100 Mbit/s |
| Configuration: | not required |
| Bus interface: | 2 x RJ45 (switched) |
| Power supply: | 24 V DC (-15 %/+20 %) |
| Input current: | typ. 120 mA + (total E-bus current)/4 |
| Current consumption E-bus: | up to 2 A |
| Power contacts: | max. 24 V DC/max. 10 A |
| Electrical isolation: | 500 V (power contact/supply voltage/Ethernet) |
| Dimensions (W x H x D): | 64 mm x 100 mm x 73 mm |
| Operating/storage temperature: | 0…+55 °C/-25…+85 °C |
| Relative humidity: | 95 %, no condensation |
| Vibration/shock resistance: | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission: | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos.: | IP 20/variable |
| Approvals/markings: | CE, UL, ATEX |
| Ex-Marking: | II 3 G Ex nA IIC T4 Gc |
| ECCN: | |
| Kraj pochodzenia: | |
| EAN: | |
| Waga: | 0,00 kg |
| Długość: | 0,00 m |
| Szerokość: | 0,00 m |
| Wysokość: | 0,00 m |